2-1445098-3

{
 "schema": "adom/verification@1",
 "part": "2-1445098-3",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Automated build checks (awaiting human validation)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)",
     "result": "pass"
    },
    {
     "text": "3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)",
     "result": "pass"
    },
    {
     "text": "adom-lbr generate + lint passed",
     "result": "pass"
    },
    {
     "text": "3 of 3 pins described",
     "result": "pass"
    },
    {
     "text": "Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "datasheet",
     "href": "docs/2-1445098-3-datasheet.pdf"
    }
   ],
   "files": {
    "2-1445098-3.kicad_sym": "d420c3ad40a30a5859a0631766ae9d2b6937ff848ef61bebefdbf09371aa6c3f",
    "2-1445098-3.kicad_mod": "4058015da911af5fb440d66545588711d7a0d0f985fc06523de284e0aa5d2f87",
    "2-1445098-3.step": "c9ee78622579ac4e6b7262405dee340bed1a9a9750495e7a821f39f91de369c2"
   }
  },
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pat...",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pattern (3.0 mm pitch, right angle, hold-downs). Footprint and 3D need checking against the TE drawing before use.",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-27",
   "by": {
    "name": "Claude, at Caleb Taylor's request",
    "handle": "claude"
   },
   "status": "verified",
   "title": "Validated against TE customer drawing C-1445098 rev C; footprint and 3D rebuilt to the drawing",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Datasheet: TE customer drawing C-1445098 rev C (12 Dec 2025, ECN-25-359104), 2 sheets, re-downloaded from te.com 2026-10-27, byte-identical to the page copy (sha256 86b030c7...).",
     "result": "pass"
    },
    {
     "text": "BOM: NTX_CCX-MIO_Carrier_v1.1 J13 is \"TE: 2-1445098-3\" (BOM, schematic and board value), the same MPN as the page: the page is the intended part.",
     "result": "pass"
    },
    {
     "text": "Pins 1-3: names are the contact numbers (the drawing has no signal names), all passive. Circuit 1 = right-hand cavity seen from the mating face (sheet 1 CIRCUIT NUMBER 1); 2 and 3 follow in order. Descriptions rewritten with the cavity keying from sheet 2.",
     "result": "pass"
    },
    {
     "text": "Footprint rebuilt from sheet 2 PCB LAYOUT FOR 3 POSITION: contacts at 3.00 pitch (6.00 span), drill 1.12 (middle of the 1.02 +0.20/-0 finished-hole band), pads 1.80; holddown hole 3.00 +-0.08 NPTH centred on contact 2, 4.32 from the row on the mating-face side; overlay of the drills on the layout coincides (provenance/evidence/overlay_sheet2_pcb_layout.png). Old footprint was a 2.54 mm vertical socket (pins 2 and 3 0.46 and 0.92 mm off, drill 1.00, no holddown hole).",
     "result": "pass"
    },
    {
     "text": "Pin 1 orientation: third-angle projection (title-block symbol); in the top view circuit 1 is on the right with the mating face toward the viewer, so with the mating face toward -y pad 1 is at x = -3.00. Silk triangle and F.Fab chevron mark pad 1; courtyard 0.5 mm round the body (latches +-6.57, face -8.92, contact bend +0.94).",
     "result": "pass"
    },
    {
     "text": "3D rebuilt (tier 3, cadquery, CC-BY-SA-4.0) from the drawing: 13.14 x 9.86 x 9.18 mm; DIM W 13.14 +-0.39, DIM Y 10.00, 3.86 + 0.51 housing, 1.30 latch, (8.92) face, (7.88) holddown tip, DIM X 3.30 +-0.15 barbs; overlays on the sheet 1 side view and sheet 2 3 POS view coincide. TE STEP rejected: te.com terms forbid redistribution. KiCad has no Micro MATE-N-LOK model.",
     "result": "pass"
    },
    {
     "text": "Undimensioned detail measured off the drawing at 47.24 px/mm; cavity depth (6.0) and mating-pin tip position are cosmetic assumptions (not shown on the drawing), recorded in provenance/3d-model.json.",
     "result": "note"
    },
    {
     "text": "step_pose.py: plain and etched STEP PASS (Z-up, seated, THT tails and peg below, identity binding); body 3.99 mm off the pad-pattern centre by design (right-angle overhang), courtyard centred on the body, contacts in all 3 holes.",
     "result": "pass"
    },
    {
     "text": "Symbol Footprint property changed from Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical to 2-1445098-3:2-1445098-3 (the page footprint).",
     "result": "note"
    },
    {
     "text": "Distributors: DigiKey A34859-ND (TE Connectivity AMP Connectors 2-1445098-3, CONN HEADER R/A 3POS 3MM) and Mouser 571-2-1445098-3 (TE Connectivity / AMP 2-1445098-3) confirmed by search 2026-10-27.",
     "result": "pass"
    },
    {
     "text": "Board affected: NTX_CCX-MIO_Carrier_v1.1 J13 uses Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical (2.54 pitch, drill 1.00, no holddown hole), so the part cannot be fitted there; the board is Caleb's to change.",
     "result": "note"
    },
    {
     "text": "Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "component-page-verify: all checks pass",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "TE customer drawing C-1445098 rev C",
     "href": "https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1445098&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf"
    },
    {
     "label": "te.com Terms of Use (why TE CAD is not redistributed)",
     "href": "https://www.te.com/en/policies-agreements/terms-of-use-te-com.html"
    }
   ],
   "files": {
    "2-1445098-3.kicad_sym": "9543d24fd19a17ccb42bf2764a52ca115cd046f8252251175ad20fb8c8631718",
    "2-1445098-3.kicad_mod": "93090e62982dc95c5bdec68a4bf4710b9143b5f77497868614adc79505c85edc",
    "2-1445098-3.step": "93b85be222d27adb54fbf3064a316c923f0e9db2af1b344bebe558328c8562c6"
   }
  }
 ]
}