component

2-1445098-3

Public Made by Adom

by adom

TE Connectivity Micro MATE-N-LOK header, right angle, 3 position, 3.00 mm pitch, plastic holddown. Footprint and 3D built from the TE drawing.

componentconnectors2-1445098-3board-derived

Verified 2-1445098-3

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TE customer drawing C-1445098 rev C; footprint and 3D rebuilt to the drawingfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: TE customer drawing C-1445098 rev C (12 Dec 2025, ECN-25-359104), 2 sheets, re-downloaded from te.com 2026-10-27, byte-identical to the page copy (sha256 86b030c7...).
  • ✓BOM: NTX_CCX-MIO_Carrier_v1.1 J13 is "TE: 2-1445098-3" (BOM, schematic and board value), the same MPN as the page: the page is the intended part.
  • ✓Pins 1-3: names are the contact numbers (the drawing has no signal names), all passive. Circuit 1 = right-hand cavity seen from the mating face (sheet 1 CIRCUIT NUMBER 1); 2 and 3 follow in order. Descriptions rewritten with the cavity keying from sheet 2.
  • ✓Footprint rebuilt from sheet 2 PCB LAYOUT FOR 3 POSITION: contacts at 3.00 pitch (6.00 span), drill 1.12 (middle of the 1.02 +0.20/-0 finished-hole band), pads 1.80; holddown hole 3.00 +-0.08 NPTH centred on contact 2, 4.32 from the row on the mating-face side; overlay of the drills on the layout coincides (provenance/evidence/overlay_sheet2_pcb_layout.png). Old footprint was a 2.54 mm vertical socket (pins 2 and 3 0.46 and 0.92 mm off, drill 1.00, no holddown hole).
  • ✓Pin 1 orientation: third-angle projection (title-block symbol); in the top view circuit 1 is on the right with the mating face toward the viewer, so with the mating face toward -y pad 1 is at x = -3.00. Silk triangle and F.Fab chevron mark pad 1; courtyard 0.5 mm round the body (latches +-6.57, face -8.92, contact bend +0.94).
  • ✓3D rebuilt (tier 3, cadquery, CC-BY-SA-4.0) from the drawing: 13.14 x 9.86 x 9.18 mm; DIM W 13.14 +-0.39, DIM Y 10.00, 3.86 + 0.51 housing, 1.30 latch, (8.92) face, (7.88) holddown tip, DIM X 3.30 +-0.15 barbs; overlays on the sheet 1 side view and sheet 2 3 POS view coincide. TE STEP rejected: te.com terms forbid redistribution. KiCad has no Micro MATE-N-LOK model.
  • •Undimensioned detail measured off the drawing at 47.24 px/mm; cavity depth (6.0) and mating-pin tip position are cosmetic assumptions (not shown on the drawing), recorded in provenance/3d-model.json.
  • ✓step_pose.py: plain and etched STEP PASS (Z-up, seated, THT tails and peg below, identity binding); body 3.99 mm off the pad-pattern centre by design (right-angle overhang), courtyard centred on the body, contacts in all 3 holes.
  • •Symbol Footprint property changed from Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical to 2-1445098-3:2-1445098-3 (the page footprint).
  • ✓Distributors: DigiKey A34859-ND (TE Connectivity AMP Connectors 2-1445098-3, CONN HEADER R/A 3POS 3MM) and Mouser 571-2-1445098-3 (TE Connectivity / AMP 2-1445098-3) confirmed by search 2026-10-27.
  • •Board affected: NTX_CCX-MIO_Carrier_v1.1 J13 uses Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical (2.54 pitch, drill 1.00, no holddown hole), so the part cannot be fitted there; the board is Caleb's to change.
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
EvidenceTE customer drawing C-1445098 rev Cte.com Terms of Use (why TE CAD is not redistributed)
Verified files✓ 2-1445098-3.kicad_sym✓ 2-1445098-3.kicad_mod✓ 2-1445098-3.step
9 Oct 2026Claude (AI build)Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pat...superseded
reviewfor all variants
  • •Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pattern (3.0 mm pitch, right angle, hold-downs). Footprint and 3D need checking against the TE drawing before use.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓3 of 3 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 2-1445098-3.kicad_sym! 2-1445098-3.kicad_mod! 2-1445098-3.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
2-1445098-3 / provenance / previous / PinSocket_1x03_P2.54mm_Vertical.kicad_mod
HistoryDownload
Caleb Publish 0.1.1 69af80b 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213
(footprint "2-1445098-3"
	(layer "F.Cu")
	(descr "Through hole straight socket strip, 1x03, 2.54mm pitch, single row (from Kicad 4.0.7), script generated"
	)
	(tags "Through hole socket strip THT 1x03 2.54mm single row")
	(property "Reference" "REF**"
		(at 0 -2.77 180)
		(layer "F.SilkS")
		(hide yes)
		(uuid "c602cafd-23bf-44b6-a19e-35c68b5df7f9")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "Value" "2-1445098-3"
		(at 0 7.85 180)
		(layer "F.SilkS")
		(hide yes)
		(uuid "7aa3d4b6-eda6-42a5-a1ea-865c387726bf")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "Datasheet" ""
		(at 0 0 180)
		(layer "F.Fab")
		(hide yes)
		(uuid "e0442ea6-b790-41a4-9c52-75cf801a13e5")
		(effects
			(font (size 1.27 1.27) (thickness 0.15))
		)
	)
	(property "Description" "AMP Connectors: CONN HEADER R/A 3POS 3MM"
		(at 0 0 180)
		(layer "F.Fab")
		(hide yes)
		(uuid "7a47ee65-a1f4-4464-ae99-4277ae56f887")
		(effects
			(font (size 1.27 1.27) (thickness 0.15))
		)
	)
	(property ki_fp_filters "Connector*:*_1x??_*")
	(units
		(unit (name "A") (pins "1" "2" "3"))
	)
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start 1.33 1.270001)
		(end 1.33 6.409999)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "322bd2b8-8c62-4f8d-890a-e53e3b0c7734")
	)
	(fp_line
		(start 1.33 -1.33)
		(end 1.33 0)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "93255282-d60e-4150-9fdb-3f2a3f2845f5")
	)
	(fp_line
		(start 0 -1.33)
		(end 1.33 -1.33)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "91fabd66-34ff-4599-aa30-798aa91f4fe6")
	)
	(fp_line
		(start -1.33 6.409999)
		(end 1.33 6.409999)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "a88a454c-0f39-4695-b1a2-567ad62c1b59")
	)
	(fp_line
		(start -1.33 1.270001)
		(end 1.33 1.270001)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "a2006da6-fa2e-41c8-bc4f-ed654591604c")
	)
	(fp_line
		(start -1.33 1.270001)
		(end -1.33 6.409999)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "318e7ac6-83a8-4be9-9b19-c92d3ebfdb63")
	)
	(fp_line
		(start 1.75 -1.8)
		(end 1.749999 6.85)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "95382856-a479-4056-aebc-d99a12ea35c0")
	)
	(fp_line
		(start 1.749999 6.85)
		(end -1.8 6.85)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "9d803292-754a-4a9b-9f1c-d28120482927")
	)
	(fp_line
		(start -1.8 6.85)
		(end -1.8 -1.8)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "bb597f35-799e-4f0c-81a3-a910433dbacd")
	)
	(fp_line
		(start -1.8 -1.8)
		(end 1.75 -1.8)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "0393aad0-ccae-4c5f-991a-512dc5665fc5")
	)
	(fp_line
		(start 1.270001 6.35)
		(end -1.270001 6.35)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "3a879d90-405e-42e7-83bb-7beeff912e4a")
	)
	(fp_line
		(start 1.27 -0.635)
		(end 1.270001 6.35)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "be34d961-bf06-4479-8b16-349bb49e0278")
	)
	(fp_line
		(start 0.635 -1.27)
		(end 1.27 -0.635)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "1d294fc3-b30e-474f-9fb6-f8674f893cd4")
	)
	(fp_line
		(start -1.27 -1.27)
		(end 0.635 -1.27)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "f5a3b268-8a8b-4072-b498-1a0d10bae654")
	)
	(fp_line
		(start -1.270001 6.35)
		(end -1.27 -1.27)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "4d4382e4-edc9-4a12-a549-62d99ed5f09e")
	)
	(pad "1" thru_hole rect
		(at 0 0)
		(size 1.7 1.7)
		(drill 1)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges no)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "2" thru_hole circle
		(at 0 2.54)
		(size 1.7 1.7)
		(drill 1)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges no)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "3" thru_hole circle
		(at 0 5.079999)
		(size 1.7 1.7)
		(drill 1)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges no)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_1x03_P2.54mm_Vertical.step"
		(offset (xyz 0 0 0))
		(scale (xyz 1 1 1))
		(rotate (xyz 0 0 0))
	)
)