component

2-1445098-3

Public Made by Adom

by adom

TE Connectivity Micro MATE-N-LOK header, right angle, 3 position, 3.00 mm pitch, plastic holddown. Footprint and 3D built from the TE drawing.

componentconnectors2-1445098-3board-derived

Verified 2-1445098-3

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TE customer drawing C-1445098 rev C; footprint and 3D rebuilt to the drawingfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: TE customer drawing C-1445098 rev C (12 Dec 2025, ECN-25-359104), 2 sheets, re-downloaded from te.com 2026-10-27, byte-identical to the page copy (sha256 86b030c7...).
  • ✓BOM: NTX_CCX-MIO_Carrier_v1.1 J13 is "TE: 2-1445098-3" (BOM, schematic and board value), the same MPN as the page: the page is the intended part.
  • ✓Pins 1-3: names are the contact numbers (the drawing has no signal names), all passive. Circuit 1 = right-hand cavity seen from the mating face (sheet 1 CIRCUIT NUMBER 1); 2 and 3 follow in order. Descriptions rewritten with the cavity keying from sheet 2.
  • ✓Footprint rebuilt from sheet 2 PCB LAYOUT FOR 3 POSITION: contacts at 3.00 pitch (6.00 span), drill 1.12 (middle of the 1.02 +0.20/-0 finished-hole band), pads 1.80; holddown hole 3.00 +-0.08 NPTH centred on contact 2, 4.32 from the row on the mating-face side; overlay of the drills on the layout coincides (provenance/evidence/overlay_sheet2_pcb_layout.png). Old footprint was a 2.54 mm vertical socket (pins 2 and 3 0.46 and 0.92 mm off, drill 1.00, no holddown hole).
  • ✓Pin 1 orientation: third-angle projection (title-block symbol); in the top view circuit 1 is on the right with the mating face toward the viewer, so with the mating face toward -y pad 1 is at x = -3.00. Silk triangle and F.Fab chevron mark pad 1; courtyard 0.5 mm round the body (latches +-6.57, face -8.92, contact bend +0.94).
  • ✓3D rebuilt (tier 3, cadquery, CC-BY-SA-4.0) from the drawing: 13.14 x 9.86 x 9.18 mm; DIM W 13.14 +-0.39, DIM Y 10.00, 3.86 + 0.51 housing, 1.30 latch, (8.92) face, (7.88) holddown tip, DIM X 3.30 +-0.15 barbs; overlays on the sheet 1 side view and sheet 2 3 POS view coincide. TE STEP rejected: te.com terms forbid redistribution. KiCad has no Micro MATE-N-LOK model.
  • •Undimensioned detail measured off the drawing at 47.24 px/mm; cavity depth (6.0) and mating-pin tip position are cosmetic assumptions (not shown on the drawing), recorded in provenance/3d-model.json.
  • ✓step_pose.py: plain and etched STEP PASS (Z-up, seated, THT tails and peg below, identity binding); body 3.99 mm off the pad-pattern centre by design (right-angle overhang), courtyard centred on the body, contacts in all 3 holes.
  • •Symbol Footprint property changed from Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical to 2-1445098-3:2-1445098-3 (the page footprint).
  • ✓Distributors: DigiKey A34859-ND (TE Connectivity AMP Connectors 2-1445098-3, CONN HEADER R/A 3POS 3MM) and Mouser 571-2-1445098-3 (TE Connectivity / AMP 2-1445098-3) confirmed by search 2026-10-27.
  • •Board affected: NTX_CCX-MIO_Carrier_v1.1 J13 uses Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical (2.54 pitch, drill 1.00, no holddown hole), so the part cannot be fitted there; the board is Caleb's to change.
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
EvidenceTE customer drawing C-1445098 rev Cte.com Terms of Use (why TE CAD is not redistributed)
Verified files✓ 2-1445098-3.kicad_sym✓ 2-1445098-3.kicad_mod✓ 2-1445098-3.step
9 Oct 2026Claude (AI build)Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pat...superseded
reviewfor all variants
  • •Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pattern (3.0 mm pitch, right angle, hold-downs). Footprint and 3D need checking against the TE drawing before use.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓3 of 3 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 2-1445098-3.kicad_sym! 2-1445098-3.kicad_mod! 2-1445098-3.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
2-1445098-3 / package.json
HistoryDownload
Caleb Publish 0.1.3 347e5ee 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158
{
  "slug": "2-1445098-3",
  "version": "0.1.3",
  "type": "component",
  "tags": [
    "component",
    "connectors",
    "2-1445098-3",
    "board-derived"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "verification.json",
    "2-1445098-3.kicad_sym",
    "2-1445098-3.kicad_mod",
    "2-1445098-3.glb",
    "2-1445098-3.step",
    "2-1445098-3.lbr",
    "docs/hero.png",
    "docs/2-1445098-3-datasheet.pdf",
    "2-1445098-3-etched.glb",
    "2-1445098-3-etched.step",
    "provenance/3d-model.json",
    "provenance/tools/build_2_1445098_3.py",
    "provenance/tools/make_fp_2_1445098_3.py",
    "provenance/tools/overlay_2_1445098_3.py",
    "provenance/evidence/overlay_sheet1_side_view.png",
    "provenance/evidence/overlay_sheet2_3pos_front_view.png",
    "provenance/evidence/overlay_sheet2_pcb_layout.png",
    "provenance/previous/PinSocket_1x03_P2.54mm_Vertical.step",
    "provenance/previous/PinSocket_1x03_P2.54mm_Vertical.kicad_mod"
  ],
  "component": {
    "mpn": "2-1445098-3",
    "manufacturer": "TE Connectivity",
    "package": "Micro MATE-N-LOK 1x03 P3.00mm right angle, holddown",
    "pin_count": 3,
    "category": "Connectors",
    "subcategory": "Micro MATE-N-LOK header, right angle, 3 position, 3.0 mm",
    "datasheet": "https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1445098&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf",
    "parts": {
      "symbol": "2-1445098-3.kicad_sym",
      "footprint": "2-1445098-3.kicad_mod",
      "model_3d": "2-1445098-3-etched.glb",
      "model_3d_plain": "2-1445098-3.glb",
      "model_3d_step": "2-1445098-3-etched.step",
      "model_3d_step_plain": "2-1445098-3.step",
      "lbr": "2-1445098-3.lbr"
    },
    "distributor_links": {
      "digikey": {
        "part": "A34859-ND",
        "url": "https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/2-1445098-3/1165157"
      },
      "mouser": {
        "part": "571-2-1445098-3",
        "url": "https://www.mouser.com/en/ProductDetail/TE-Connectivity-AMP/2-1445098-3?qs=Eu63EZxBwKI4XHgeDfT4RA%3D%3D"
      },
      "lcsc": false,
      "lcsc_note": "2026-10-09: no LCSC number on the source BOM and none found in the JLCPCB/LCSC catalogue for 2-1445098-3."
    },
    "pins": [
      {
        "number": "1",
        "name": "1",
        "type": "passive",
        "description": "Contact 1 (circuit number 1: the right-hand cavity seen from the mating face, square cavity with no keying chamfer); numbering per the manufacturer drawing. [datasheet p.1]"
      },
      {
        "number": "2",
        "name": "2",
        "type": "passive",
        "description": "Contact 2 (middle circuit, cavity chamfered bottom-right seen from the mating face); numbering per the manufacturer drawing. [datasheet p.2]"
      },
      {
        "number": "3",
        "name": "3",
        "type": "passive",
        "description": "Contact 3 (left-hand cavity seen from the mating face, chamfered bottom-left); numbering per the manufacturer drawing. [datasheet p.2]"
      }
    ],
    "provenance": {
      "datasheet": {
        "url": "https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1445098&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf",
        "pages": 2,
        "sha256": "86b030c7ac8e8246428b87adecb18361e60b12eea66404a46ca7ebd9b29c7c96",
        "source_tier": "mfr",
        "retrieved": "2026-10-27",
        "edition": "C-1445098 rev C, 12 Dec 2025 (ECN-25-359104), customer drawing, 2 sheets"
      },
      "cad": "Footprint: Adom-built from TE customer drawing C-1445098 rev C sheet 2 (PCB layout for 3 position), CC-BY-SA-4.0; 3D: Adom-built with cadquery from the same drawing (tier 3, CC-BY-SA-4.0), because TE's own STEP is licensed for personal, non-commercial use only with no redistribution and KiCad has no Micro MATE-N-LOK model.",
      "pins": {
        "total": 3,
        "described": 3,
        "cites_pages": false,
        "refuses_to_fabricate": true
      },
      "build": {
        "tool": "board-derived part page builder 0.1: one-off Claude session scripts in Caleb Taylor's container (retired; not the Adom parts factory)",
        "pins": "KiCad symbol from the source board",
        "at": "2026-10-09"
      }
    },
    "models_3d": [
      {
        "file": "2-1445098-3.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          13.14,
          9.86,
          9.18
        ],
        "zmin_mm": -3.51,
        "centre_offset_mm": 3.99,
        "footprint_binding": "identity",
        "sha256": "93b85be222d27adb54fbf3064a316c923f0e9db2af1b344bebe558328c8562c6",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)",
        "notes": [
          "body 3.99 mm off the pad-pattern centre (overhang), contacts on all 3 top-side pads"
        ]
      },
      {
        "file": "2-1445098-3-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          13.14,
          9.86,
          9.18
        ],
        "zmin_mm": -3.51,
        "centre_offset_mm": 3.99,
        "footprint_binding": "identity",
        "sha256": "3b53c7e33cee2629895cdc4ec4e720de4edd01ac4e258782897faf0c169d8f05",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)",
        "notes": [
          "body 3.99 mm off the pad-pattern centre (overhang), contacts on all 3 top-side pads"
        ]
      }
    ]
  },
  "description": "TE Connectivity Micro MATE-N-LOK header, right angle, 3 position, 3.0 mm, PinSocket_1x03_P2.54mm_Vertical. KiCad symbol, footprint and 3D as used on Adom boards."
}