component

2-1445098-3

Public Made by Adom

by adom

TE Connectivity Micro MATE-N-LOK header, right angle, 3 position, 3.00 mm pitch, plastic holddown. Footprint and 3D built from the TE drawing.

componentconnectors2-1445098-3board-derived

Verified 2-1445098-3

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TE customer drawing C-1445098 rev C; footprint and 3D rebuilt to the drawingfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: TE customer drawing C-1445098 rev C (12 Dec 2025, ECN-25-359104), 2 sheets, re-downloaded from te.com 2026-10-27, byte-identical to the page copy (sha256 86b030c7...).
  • ✓BOM: NTX_CCX-MIO_Carrier_v1.1 J13 is "TE: 2-1445098-3" (BOM, schematic and board value), the same MPN as the page: the page is the intended part.
  • ✓Pins 1-3: names are the contact numbers (the drawing has no signal names), all passive. Circuit 1 = right-hand cavity seen from the mating face (sheet 1 CIRCUIT NUMBER 1); 2 and 3 follow in order. Descriptions rewritten with the cavity keying from sheet 2.
  • ✓Footprint rebuilt from sheet 2 PCB LAYOUT FOR 3 POSITION: contacts at 3.00 pitch (6.00 span), drill 1.12 (middle of the 1.02 +0.20/-0 finished-hole band), pads 1.80; holddown hole 3.00 +-0.08 NPTH centred on contact 2, 4.32 from the row on the mating-face side; overlay of the drills on the layout coincides (provenance/evidence/overlay_sheet2_pcb_layout.png). Old footprint was a 2.54 mm vertical socket (pins 2 and 3 0.46 and 0.92 mm off, drill 1.00, no holddown hole).
  • ✓Pin 1 orientation: third-angle projection (title-block symbol); in the top view circuit 1 is on the right with the mating face toward the viewer, so with the mating face toward -y pad 1 is at x = -3.00. Silk triangle and F.Fab chevron mark pad 1; courtyard 0.5 mm round the body (latches +-6.57, face -8.92, contact bend +0.94).
  • ✓3D rebuilt (tier 3, cadquery, CC-BY-SA-4.0) from the drawing: 13.14 x 9.86 x 9.18 mm; DIM W 13.14 +-0.39, DIM Y 10.00, 3.86 + 0.51 housing, 1.30 latch, (8.92) face, (7.88) holddown tip, DIM X 3.30 +-0.15 barbs; overlays on the sheet 1 side view and sheet 2 3 POS view coincide. TE STEP rejected: te.com terms forbid redistribution. KiCad has no Micro MATE-N-LOK model.
  • •Undimensioned detail measured off the drawing at 47.24 px/mm; cavity depth (6.0) and mating-pin tip position are cosmetic assumptions (not shown on the drawing), recorded in provenance/3d-model.json.
  • ✓step_pose.py: plain and etched STEP PASS (Z-up, seated, THT tails and peg below, identity binding); body 3.99 mm off the pad-pattern centre by design (right-angle overhang), courtyard centred on the body, contacts in all 3 holes.
  • •Symbol Footprint property changed from Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical to 2-1445098-3:2-1445098-3 (the page footprint).
  • ✓Distributors: DigiKey A34859-ND (TE Connectivity AMP Connectors 2-1445098-3, CONN HEADER R/A 3POS 3MM) and Mouser 571-2-1445098-3 (TE Connectivity / AMP 2-1445098-3) confirmed by search 2026-10-27.
  • •Board affected: NTX_CCX-MIO_Carrier_v1.1 J13 uses Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical (2.54 pitch, drill 1.00, no holddown hole), so the part cannot be fitted there; the board is Caleb's to change.
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
EvidenceTE customer drawing C-1445098 rev Cte.com Terms of Use (why TE CAD is not redistributed)
Verified files✓ 2-1445098-3.kicad_sym✓ 2-1445098-3.kicad_mod✓ 2-1445098-3.step
9 Oct 2026Claude (AI build)Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pat...superseded
reviewfor all variants
  • •Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pattern (3.0 mm pitch, right angle, hold-downs). Footprint and 3D need checking against the TE drawing before use.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓3 of 3 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 2-1445098-3.kicad_sym! 2-1445098-3.kicad_mod! 2-1445098-3.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
2-1445098-3 / README.md
History Download
Caleb Publish 0.1.1 69af80b 1d ago

2-1445098-3

TE Connectivity · Micro MATE-N-LOK header, right angle, 3 position, 3.0 mm · Micro MATE-N-LOK 1x03 P3.00mm right angle, holddown

2-1445098-3 from TE Connectivity: a 3 position Micro MATE-N-LOK right-angle header at 3.00 mm pitch with a plastic holddown. The footprint follows TE's recommended PCB layout and the 3D model was built from the TE drawing (TE's own CAD may not be redistributed).

Pinout

Pin Name Type Function
1 1 passive Contact 1 (circuit number 1: the right-hand cavity seen from the mating face, square cavity with no keying chamfer); numbering per the manufacturer drawing. [datasheet p.1]
2 2 passive Contact 2 (middle circuit, cavity chamfered bottom-right seen from the mating face); numbering per the manufacturer drawing. [datasheet p.2]
3 3 passive Contact 3 (left-hand cavity seen from the mating face, chamfered bottom-left); numbering per the manufacturer drawing. [datasheet p.2]

Key specifications

Parameter Value
Manufacturer TE Connectivity
Package Micro MATE-N-LOK 1x03 P3.00mm right angle, holddown
Category Connectors
Pins 3
Mouser 571-2-1445098-3
DigiKey A34859-ND

CAD

  • Symbol: 2-1445098-3 (source library Connector:Conn_01x03_Pin)
  • Footprint: 2-1445098-3 (Adom-built from TE drawing C-1445098 rev C sheet 2: three 1.12 mm drills at 3.00 mm, 1.80 mm pads, one 3.00 mm non-plated holddown hole 4.32 mm from the contact row; origin on contact 2)
  • 3D model path in footprint: ${KIPRJMOD}/2-1445098-3.step
  • 3D files: 2-1445098-3-etched.step / 2-1445098-3-etched.glb carry the MPN etch as a separate Adom.LaserEtch part; 2-1445098-3.step / 2-1445098-3.glb are the bare model. The model is Adom-built with cadquery from the TE drawing (builder, overlays on the drawing and provenance/3d-model.json in provenance/).
  • EAGLE/Fusion library: 2-1445098-3.lbr (adom-lbr)

Provenance

  • Datasheet: TE Connectivity customer drawing C-1445098 (C-1445098 rev C, 12 Dec 2025 (ECN-25-359104), customer drawing, 2 sheets, sha256 86b030c7ac8e8246, retrieved 2026-10-27, tier: mfr)
  • CAD: Footprint: Adom-built from TE customer drawing C-1445098 rev C sheet 2 (PCB layout for 3 position), CC-BY-SA-4.0; 3D: Adom-built with cadquery from the same drawing (tier 3, CC-BY-SA-4.0), because TE's own STEP is licensed for personal, non-commercial use only with no redistribution and KiCad has no Micro MATE-N-LOK model.
  • Pins: KiCad symbol from the source board.

Datasheet PDF