component

2-1445098-3

Public Made by Adom

by adom

TE Connectivity Micro MATE-N-LOK header, right angle, 3 position, 3.00 mm pitch, plastic holddown. Footprint and 3D built from the TE drawing.

componentconnectors2-1445098-3board-derived

Verified 2-1445098-3

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TE customer drawing C-1445098 rev C; footprint and 3D rebuilt to the drawingfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: TE customer drawing C-1445098 rev C (12 Dec 2025, ECN-25-359104), 2 sheets, re-downloaded from te.com 2026-10-27, byte-identical to the page copy (sha256 86b030c7...).
  • ✓BOM: NTX_CCX-MIO_Carrier_v1.1 J13 is "TE: 2-1445098-3" (BOM, schematic and board value), the same MPN as the page: the page is the intended part.
  • ✓Pins 1-3: names are the contact numbers (the drawing has no signal names), all passive. Circuit 1 = right-hand cavity seen from the mating face (sheet 1 CIRCUIT NUMBER 1); 2 and 3 follow in order. Descriptions rewritten with the cavity keying from sheet 2.
  • ✓Footprint rebuilt from sheet 2 PCB LAYOUT FOR 3 POSITION: contacts at 3.00 pitch (6.00 span), drill 1.12 (middle of the 1.02 +0.20/-0 finished-hole band), pads 1.80; holddown hole 3.00 +-0.08 NPTH centred on contact 2, 4.32 from the row on the mating-face side; overlay of the drills on the layout coincides (provenance/evidence/overlay_sheet2_pcb_layout.png). Old footprint was a 2.54 mm vertical socket (pins 2 and 3 0.46 and 0.92 mm off, drill 1.00, no holddown hole).
  • ✓Pin 1 orientation: third-angle projection (title-block symbol); in the top view circuit 1 is on the right with the mating face toward the viewer, so with the mating face toward -y pad 1 is at x = -3.00. Silk triangle and F.Fab chevron mark pad 1; courtyard 0.5 mm round the body (latches +-6.57, face -8.92, contact bend +0.94).
  • ✓3D rebuilt (tier 3, cadquery, CC-BY-SA-4.0) from the drawing: 13.14 x 9.86 x 9.18 mm; DIM W 13.14 +-0.39, DIM Y 10.00, 3.86 + 0.51 housing, 1.30 latch, (8.92) face, (7.88) holddown tip, DIM X 3.30 +-0.15 barbs; overlays on the sheet 1 side view and sheet 2 3 POS view coincide. TE STEP rejected: te.com terms forbid redistribution. KiCad has no Micro MATE-N-LOK model.
  • •Undimensioned detail measured off the drawing at 47.24 px/mm; cavity depth (6.0) and mating-pin tip position are cosmetic assumptions (not shown on the drawing), recorded in provenance/3d-model.json.
  • ✓step_pose.py: plain and etched STEP PASS (Z-up, seated, THT tails and peg below, identity binding); body 3.99 mm off the pad-pattern centre by design (right-angle overhang), courtyard centred on the body, contacts in all 3 holes.
  • •Symbol Footprint property changed from Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical to 2-1445098-3:2-1445098-3 (the page footprint).
  • ✓Distributors: DigiKey A34859-ND (TE Connectivity AMP Connectors 2-1445098-3, CONN HEADER R/A 3POS 3MM) and Mouser 571-2-1445098-3 (TE Connectivity / AMP 2-1445098-3) confirmed by search 2026-10-27.
  • •Board affected: NTX_CCX-MIO_Carrier_v1.1 J13 uses Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical (2.54 pitch, drill 1.00, no holddown hole), so the part cannot be fitted there; the board is Caleb's to change.
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
EvidenceTE customer drawing C-1445098 rev Cte.com Terms of Use (why TE CAD is not redistributed)
Verified files✓ 2-1445098-3.kicad_sym✓ 2-1445098-3.kicad_mod✓ 2-1445098-3.step
9 Oct 2026Claude (AI build)Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pat...superseded
reviewfor all variants
  • •Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pattern (3.0 mm pitch, right angle, hold-downs). Footprint and 3D need checking against the TE drawing before use.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓3 of 3 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 2-1445098-3.kicad_sym! 2-1445098-3.kicad_mod! 2-1445098-3.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
2-1445098-3 / 2-1445098-3.kicad_sym
HistoryDownload
Caleb Publish 0.1.3 347e5ee 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188
(kicad_symbol_lib
	(version 20241209)
	(generator "board-derived")
	(generator_version "1.0")
	(symbol "2-1445098-3"
		(pin_names (offset 1.016) (hide yes))
		(exclude_from_sim no)
		(in_bom yes)
		(on_board yes)
		(in_pos_files yes)
		(duplicate_pin_numbers_are_jumpers no)
		(property "Reference" "J"
			(at 0 5.08 0)
			(show_name no)
			(do_not_autoplace no)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "Manufacturer" "TE Connectivity"
			(at 0 0 0)
			(effects
				(font (size 1.27 1.27))
				(hide yes)
			)
		)
		(property "DigiKey" "A34859-ND"
			(at 0 0 0)
			(effects
				(font (size 1.27 1.27))
				(hide yes)
			)
		)
		(property "Mouser" "571-2-1445098-3"
			(at 0 0 0)
			(effects
				(font (size 1.27 1.27))
				(hide yes)
			)
		)
		(property "Value" "2-1445098-3"
			(at 0 -5.08 0)
			(show_name no)
			(do_not_autoplace no)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "Footprint" "2-1445098-3:2-1445098-3"
			(at 0 0 0)
			(show_name no)
			(do_not_autoplace no)
			(hide yes)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "Datasheet" "https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1445098&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf"
			(at 0 0 0)
			(show_name no)
			(do_not_autoplace no)
			(hide yes)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "Description" "2-1445098-3 Micro MATE-N-LOK header, right angle, 3 position, 3.0 mm"
			(at 0 0 0)
			(show_name no)
			(do_not_autoplace no)
			(hide yes)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "ki_locked" ""
			(at 0 0 0)
			(show_name no)
			(do_not_autoplace no)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "ki_keywords" "connector"
			(at 0 0 0)
			(show_name no)
			(do_not_autoplace no)
			(hide yes)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "ki_fp_filters" "Connector*:*_1x??_*"
			(at 0 0 0)
			(show_name no)
			(do_not_autoplace no)
			(hide yes)
			(effects
				(font (size 1.27 1.27))
			)
		)
		(property "MPN" "2-1445098-3"
			(at 0 0 0)
			(effects
				(font (size 1.27 1.27))
				(hide yes)
			)
		)
		(symbol "2-1445098-3_1_1"
			(rectangle
				(start 0.8636 2.667)
				(end 0 2.413)
				(stroke (width 0.1524) (type default))
				(fill (type outline))
			)
			(rectangle
				(start 0.8636 0.127)
				(end 0 -0.127)
				(stroke (width 0.1524) (type default))
				(fill (type outline))
			)
			(rectangle
				(start 0.8636 -2.413)
				(end 0 -2.667)
				(stroke (width 0.1524) (type default))
				(fill (type outline))
			)
			(polyline
				(pts (xy 1.27 2.54) (xy 0.8636 2.54))
				(stroke (width 0.1524) (type default))
				(fill (type none))
			)
			(polyline
				(pts (xy 1.27 0) (xy 0.8636 0))
				(stroke (width 0.1524) (type default))
				(fill (type none))
			)
			(polyline
				(pts (xy 1.27 -2.54) (xy 0.8636 -2.54))
				(stroke (width 0.1524) (type default))
				(fill (type none))
			)
			(pin passive line
				(at 5.08 2.54 180)
				(length 3.81)
				(name "1"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "1"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
			(pin passive line
				(at 5.08 0 180)
				(length 3.81)
				(name "2"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "2"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
			(pin passive line
				(at 5.08 -2.54 180)
				(length 3.81)
				(name "3"
					(effects
						(font (size 1.27 1.27))
					)
				)
				(number "3"
					(effects
						(font (size 1.27 1.27))
					)
				)
			)
		)
		(embedded_fonts no)
	)
)