main
Ray Publish 0.1.0 5ac3f00

2.0mm-5P ZZ-MS

SHOU HAN · Wire To Board Connector · JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical

2.0mm-5P ZZ-MS from SHOU HAN, in a JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Contact 1; numbering follows the footprint.
2 2 passive Contact 2; numbering follows the footprint.
3 3 passive Contact 3; numbering follows the footprint.
4 4 passive Contact 4; numbering follows the footprint.
5 5 passive Contact 5; numbering follows the footprint.

Key specifications

Parameter Value
Manufacturer SHOU HAN
Package JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical
Category Connectors
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Contact resistance (initial) 20 mΩ Item 5.3, as printed ≤20 mΩ 4
Insulation resistance (initial) 100 MΩ Item 5.4, as printed ≥100 MΩ 4
Rated voltage 250 V AC/DC, item 5.1 4
Rated current 2 A AC/DC, item 5.2 4
Male contact retention force 10 N per pin, item 6.1 4
Female contact retention force 10 N per pin, item 6.2 4
Plug-in force 3 N per pin, item 6.3 4
Plug-out force 0.5 N per pin, item 6.4 4
Solder area coverage 95 % Solderability item 7.1, time 2.5±0.5 s, temperature 250±5 ℃ 4
Contact resistance after heat test 20 mΩ Item 7.3, +85±3 ℃, 96 h 5
Contact resistance after cold test 20 mΩ Item 7.4, -25±3 ℃, 48 h 5
Contact resistance after temperature cycling 20 mΩ Item 7.5, 5 cycles, low -25±3 ℃, high 85±3 ℃ 5
Contact resistance after humidity test 20 mΩ Item 7.6, 60±2 ℃, 90%-96% RH, 96 h 5
Insulation resistance after humidity test 100 MΩ Item 7.6, 60±2 ℃, 90%-96% RH, 96 h 5
Contact resistance after salt spray test 20 mΩ Item 7.7, salt concentration 5±1 %, 35±2 ℃, 16±2 h 5
Ambient operating temperature -25 85 ℃ Use condition section 2.1 and drawing note 3
Applicable PCB thickness 1.2 1.6 mm Use condition section 2.2 and drawing note (scope section 1 prints 0.6-1.2 mm) 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Nylon Plastic 塑 壳 Nylon66 UL94V-0 3
contacts Phosphor bronze Contact Phosphor bronze 3

CAD (KiCad official)

  • Symbol: 2.0mm-5P ZZ-MS
  • Footprint: Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical
  • 3D model: JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical (KiCad packages3D, STEP)
  • 3D model files: 2-0mm-5p-zz-ms-etched.step / 2-0mm-5p-zz-ms-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 2-0mm-5p-zz-ms.step / 2-0mm-5p-zz-ms.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SHOU HAN datasheet (5 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary connector numbering (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF