main
Ray Publish 0.1.0 0c59b52
{
  "slug": "1edc20i12ahxuma1",
  "version": "0.1.0",
  "type": "component",
  "description": "Infineon Technologies Gate Drivers, SOIC-8-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "1edc20i12ahxuma1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "1edc20i12ahxuma1.kicad_sym",
    "1edc20i12ahxuma1.kicad_mod",
    "1edc20i12ahxuma1.glb",
    "1edc20i12ahxuma1.step",
    "1edc20i12ahxuma1.lbr",
    "docs/hero.png",
    "docs/1edc20i12ahxuma1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "1edc20i12ahxuma1-hero.glb",
    "1edc20i12ahxuma1-hero.overlay.json",
    "1edc20i12ahxuma1-etched.glb"
  ],
  "component": {
    "mpn": "1EDC20I12AHXUMA1",
    "manufacturer": "Infineon Technologies",
    "package": "SOIC-8-300mil",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0d1e597c4ce434425d64023e1c05e3a7.pdf",
    "parts": {
      "symbol": "1edc20i12ahxuma1.kicad_sym",
      "footprint": "1edc20i12ahxuma1.kicad_mod",
      "model_3d": "1edc20i12ahxuma1-hero.glb",
      "model_3d_plain": "1edc20i12ahxuma1-etched.glb",
      "model_3d_step": "1edc20i12ahxuma1-etched.step",
      "model_3d_step_plain": "1edc20i12ahxuma1.step",
      "lbr": "1edc20i12ahxuma1.lbr"
    },
    "distributor_links": {
      "lcsc": "C17567116",
      "digikey": "1EDC20I12AHXUMA1TR-ND",
      "mouser": "726-1EDC20I12AHXUMA1"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T00:04:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1EDC20I12AHXUMA1TR-ND",
        "status": "found",
        "lifecycle": "Not For New Designs"
      },
      "mouser": {
        "pn": "726-1EDC20I12AHXUMA1",
        "status": "found",
        "lifecycle": "Not Recommended for New Designs"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC1",
        "type": "power_in",
        "description": "Logic input supply voltage with a 3.1 V to 17 V operating range (3.3 V up to 15 V wide operating range as stated in the pin description), and an 18.0 V absolute maximum."
      },
      {
        "number": "2",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverted driver input (active high) that controls the output when IN- is low; it has an internal weak pull-down favoring the off-state and a minimum pulse width filter against noise."
      },
      {
        "number": "3",
        "name": "IN-",
        "type": "input",
        "description": "Inverted driver input (active low) that controls the output when IN+ is high; it has an internal weak pull-up favoring the off-state and a minimum pulse width filter against noise."
      },
      {
        "number": "4",
        "name": "GND1",
        "type": "power_in",
        "description": "Ground connection of the input (logic) circuit."
      },
      {
        "number": "5",
        "name": "GND2",
        "type": "power_in",
        "description": "Reference ground of the output driving circuit; in a bipolar supply configuration it is connected to the negative supply voltage."
      },
      {
        "number": "6",
        "name": "VCC2",
        "type": "power_in",
        "description": "Positive power supply pin of the output driving circuit (operating range 13 V to 35 V referred to GND2); a proper blocking capacitor must be placed close to this pin."
      },
      {
        "number": "7",
        "name": "OUT+",
        "type": "output",
        "description": "Driver source output that turns on the external IGBT by switching to VCC2 in the on-state; it can sink approx. 100 mA during turn-off and is turned off at a UVLO event."
      },
      {
        "number": "8",
        "name": "OUT-",
        "type": "output",
        "description": "Driver sink output that turns off the external IGBT by switching to GND2 in the off-state; during UVLO an active shut-down keeps the output at a low level."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The requested package 'SOIC-8-300mil' does not appear in the datasheet. The only package given for t; Operating ranges in pin descriptions are taken from the Absolute Maximum/Operating tables (VCC1 3.1-"
        ],
        "pages_sent": 18,
        "cost_usd": 0.07,
        "at": "2026-11-11T00:04:00"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/0d1e597c4ce434425d64023e1c05e3a7.pdf",
        "pages": 18,
        "sha256": "b02b03648102aedc",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "1edc20i12ahxuma1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          11.5,
          5.85,
          2.8
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7835b043f302f4e38c68e80e7290f961db6856aac23a2204bcf32fbed7df4481",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "1edc20i12ahxuma1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          11.5,
          5.85,
          2.8
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c5c0f2407b057d526805cf782920cef58f7e0a18ce4c5267ed37b31729782c23",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}