1ED44173N01BXTSA1

{
  "slug": "1ed44173n01bxtsa1",
  "version": "0.1.0",
  "type": "component",
  "description": "Infineon Technologies Gate Drivers, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "1ed44173n01bxtsa1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "1ed44173n01bxtsa1.kicad_sym",
    "1ed44173n01bxtsa1.kicad_mod",
    "1ed44173n01bxtsa1.glb",
    "1ed44173n01bxtsa1.step",
    "1ed44173n01bxtsa1.lbr",
    "docs/hero.png",
    "docs/1ed44173n01bxtsa1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "1ed44173n01bxtsa1-hero.glb",
    "1ed44173n01bxtsa1-hero.overlay.json",
    "1ed44173n01bxtsa1-etched.glb"
  ],
  "component": {
    "mpn": "1ED44173N01BXTSA1",
    "manufacturer": "Infineon Technologies",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589031728010289152",
    "parts": {
      "symbol": "1ed44173n01bxtsa1.kicad_sym",
      "footprint": "1ed44173n01bxtsa1.kicad_mod",
      "model_3d": "1ed44173n01bxtsa1-hero.glb",
      "model_3d_plain": "1ed44173n01bxtsa1-etched.glb",
      "model_3d_step": "1ed44173n01bxtsa1-etched.step",
      "model_3d_step_plain": "1ed44173n01bxtsa1.step",
      "lbr": "1ed44173n01bxtsa1.lbr"
    },
    "distributor_links": {
      "lcsc": "C1513367"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T19:41:04Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OCP",
        "type": "input",
        "description": "Current sense input that senses the negative voltage drop across the system sense resistor, with an over-current threshold VOCTH of -246 mV typ (range -259 mV to -233 mV) and an absolute minimum of -10 V."
      },
      {
        "number": "2",
        "name": "COM",
        "type": "power_in",
        "description": "Ground reference; all voltage parameters of the device are referenced to COM."
      },
      {
        "number": "3",
        "name": "OUT",
        "type": "output",
        "description": "Gate drive output for the external MOSFET, with typical pulsed sourcing and sinking current of 2.6 A (PW ≤ 2 µs)."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage with a recommended range of 8.6 V to 20 V and an absolute maximum of 25 V referenced to COM; internal UVLO holds OUT low when VCC is below the threshold."
      },
      {
        "number": "5",
        "name": "EN/FLT",
        "type": "bidirectional",
        "description": "Enable input, negative-logic open-drain fault output, and fault clear time programming pin: the output is enabled when the pin is above VENH (2.1 V typ) and disabled when below VENL (1.0 V typ), and it is pulled internally low during a fault."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "input",
        "description": "Logic input for the gate driver output, in phase with OUT, with VINH typ 2.1 V and VINL typ 1.0 V; the output is held low when the input is floating."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Orderable part number 1ED44173N01BXTSA1 is listed in the ordering table under PG-SOT23-6-3 (Tape and; EN/FLT has three functions (enable input, open-drain fault output, fault clear timing), and OCP is a"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0541,
        "at": "2026-10-18T19:40:49"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589031728010289152",
        "pages": 20,
        "sha256": "335b817ae7f3547b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "1ed44173n01bxtsa1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "1ed44173n01bxtsa1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1d86c67e185eeb88b4eec116ad761dbdff07f7872a55d883a66b38e4d5b0b1de",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}