main
Ray Publish 0.1.0 76b5d9e

1ED3123MU12HXUMA1

Infineon Technologies · Gate Drivers · SOIC-8-300mil

1ED3123MU12HXUMA1 from Infineon Technologies, in a SOIC-8-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Logic input supply voltage with a 3.3 V to 15 V wide operating range (Table 5 gives VCC1 as 3.1 V to 15 V).
2 IN+ input Non-inverted control input (active high) with an internal noise filter and an internal weak pull-down that favors the off-state; logic thresholds are VIH min 2.5 V and VIL max 1.1 V.
3 IN- input Inverted control input (active low) with an internal noise filter and an internal weak pull-up that favors the off-state; logic thresholds are VIH min 2.5 V and VIL max 1.1 V.
4 GND1 power_in Logic ground connection of the input circuit, to which the absolute maximum and input ratings are referred.
5 VEE2 power_in Reference ground of the output driving circuit, connected to the negative supply in a bipolar supply configuration.
6 OUT- output Driver sink output that turns off the external IGBT by switching to VEE2 in the off-state, with an active shut-down keeping the output low during UVLO.
7 OUT+ output Driver source output that turns on the external IGBT by switching to VCC2 in the on-state, and is turned off at an UVLO event.
8 VCC2 power_in Positive power supply of the output driving circuit, with an operating range of 10 V to 35 V referred to VEE2, and a blocking capacitor to be placed close to this pin.

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package SOIC-8-300mil
Category Motor Driver ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input to output offset voltage VOFFSET 2300 V VVEE2,max-VVEE2,min with VVEE2,max ≥ VGND1 ≥ VVEE2,min 11
Power supply output side VVCC2 -0.3 40 V 11
Power supply input side VVCC1 -0.3 17 V VCC1 - GND1 11
Logic input voltages (IN+, IN-) VIN -0.3 6.5 V IN - GND1 11
Junction temperature TJ -40 150 °C 11
Storage temperature TStg -55 150 °C 11
Power dissipation (input side) PD,IN 100 mW TA = 65°C 11
Power dissipation (output side) PD,OUT 700 mW TA = 65°C 11
ESD robustness, human body model VESD,HBM 4 kV Human body model 11
Thermal resistance junction to ambient RthJA,OUT 88 K/W TA = 85°C 300 mil, 1s0p, PJ = 266 mW 11
Characterization parameter junction to package top, input side ΨJtop 6 K/W 11
Power supply output side VVCC2 10 35 V with respect to VEE2 12
Power supply input side VVCC1 3.1 15 V 12
Logic input voltages (IN+, IN-) VIN -0.3 5.5 V 12
Switching frequency fSW 1 MHz PD applies 12
Ambient temperature TA -40 125 °C 12
Common mode transient immunity CMTI -200 200 kV/µs VOFFSET,test = 1500 V 12
UVLO threshold input side (on) VUVLOH1 3.1 V 13
UVLO threshold input side (off) VUVLOL1 2.5 V 13
UVLO hysteresis input side VHYS1 0.1 0.2 V 13
UVLO threshold output side (off) VUVLOL2,1 8 V 1ED3120MU12H, 1ED3122MU12H, 1ED3123MU12H 13
UVLO threshold output side (on) VUVLOH2,1 10 V 1ED3120MU12H, 1ED3122MU12H, 1ED3123MU12H 13
UVLO hysteresis output side VHYS2 0.8 V 13
Quiescent current input side IQ1 1.1 mA static, output low 13
Quiescent current output side IQ2 2 mA 13
Start up time tSTART 2.5 20 µs 13
UVLO detection filter time tUVLOflt 50 ns 13
IN+, IN- low input threshold voltage VIN,L 1.1 V 13
IN+, IN- high input threshold voltage VIN,H 2.5 V 13
IN+, IN- low/high hysteresis VIN,HYS 0.5 0.8 V 13
IN+, IN- input current IIN 100 µA VVCC1 = 5 V; VIN ≤ VVCC1 13
High level output peak current IOUT,H 6 13.5 A VCC2-OUT+ = 15 V, Output on 14
High level output on resistance RDSON,H 0.27 0.45 0.65 Ω IOUT,H = 0.1 A 14
Low level output peak current IOUT,L 6 14 A OUT--VEE2 = 15 V, Output off 14
Low level output on resistance RDSON,L 0.21 0.35 0.6 Ω IOUT,L = 0.1 A 14
High level output voltage ΔVOUT,H 0.3 V VCC2-VOUT,H; IOUT = 20 mA 14
Low level output voltage ΔVOUT,L 0.1 V VCC2-VOUT,H; IOUT = 20 mA 14
Short circuit clamp voltage between OUT+/CLAMP and VCC2 VCLP 2 V Output on, IOUT = 500 mA, t < 10 µs 14
Input to output propagation delay ON tPDON 80 90 100 ns CLOAD = 100 pF, IN turn-on threshold to 10% output on 15
Input to output propagation delay OFF tPDOFF 80 90 100 ns CLOAD = 100 pF, IN turn-off threshold to 90% output off 15
Input to output propagation delay distortion tPDISTO -5 0 5 ns tPDOFF - tPDON 16
Input pulse suppression time (filter time) tINFLT 30 ns shorter pulses will not propagate to the output 16
Minimum input pulse length tMININ 40 ns 16
Input to output propagation delay variation due to temperature tPD,T 14 ns 16
Input to output propagation delay distortion variation due to temperature tPDISTO,T 3 ns 16
Input to output, part to part propagation delay ON variation /tPDon,P2P/ 7 ns CLOAD = 100 pF 16
Rise time tRISE 15 ns CLOAD = 100 pF 16
Fall time tFALL 15 ns CLOAD = 100 pF 16
Rise time tRISE 30 ns CLOAD = 1 nF 16
Fall time tFALL 30 ns CLOAD = 1 nF 16
Active shut down voltage, cold VACTSD,C 1.9 V IOUT = 10 mA; VCC2 unsupplied; TA < 20°C 16
Active shut down voltage, hot VACTSD,H 1.7 V IOUT- = 10 mA; VCC2 unsupplied; TA ≥ 20°C 16

CAD (KiCad official)

  • Symbol: 1ED3123MU12HXUMA1
  • Footprint: Package_SO:SOIC-8_7.5x5.85mm_P1.27mm
  • 3D model: SOIC-8-300mil (KiCad packages3D, STEP)
  • 3D model files: 1ed3123mu12hxuma1-etched.step / 1ed3123mu12hxuma1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 1ed3123mu12hxuma1.step / 1ed3123mu12hxuma1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (20 pp, sha256 dbbdbb24e964046a, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF