1ED3122MC12HXUMA1

{
  "slug": "1ed3122mc12hxuma1",
  "version": "0.1.0",
  "type": "component",
  "description": "Infineon Technologies Gate Drivers, SOIC-8-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "1ed3122mc12hxuma1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "1ed3122mc12hxuma1.kicad_sym",
    "1ed3122mc12hxuma1.kicad_mod",
    "1ed3122mc12hxuma1.glb",
    "1ed3122mc12hxuma1.step",
    "1ed3122mc12hxuma1.lbr",
    "docs/hero.png",
    "docs/1ed3122mc12hxuma1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "1ed3122mc12hxuma1-hero.glb",
    "1ed3122mc12hxuma1-hero.overlay.json",
    "1ed3122mc12hxuma1-etched.glb"
  ],
  "component": {
    "mpn": "1ED3122MC12HXUMA1",
    "manufacturer": "Infineon Technologies",
    "package": "SOIC-8-300mil",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590907596536688640",
    "parts": {
      "symbol": "1ed3122mc12hxuma1.kicad_sym",
      "footprint": "1ed3122mc12hxuma1.kicad_mod",
      "model_3d": "1ed3122mc12hxuma1-hero.glb",
      "model_3d_plain": "1ed3122mc12hxuma1-etched.glb",
      "model_3d_step": "1ed3122mc12hxuma1-etched.step",
      "model_3d_step_plain": "1ed3122mc12hxuma1.step",
      "lbr": "1ed3122mc12hxuma1.lbr"
    },
    "distributor_links": {
      "lcsc": "C17379449",
      "digikey": "448-1ED3122MC12HXUMA1TR-ND",
      "mouser": "726-D3122MC12HXUMA1"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T00:35:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "448-1ED3122MC12HXUMA1TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "726-D3122MC12HXUMA1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC1",
        "type": "power_in",
        "description": "Logic input supply voltage, operating over a wide range of 3.3 V up to 15 V (Table 5 gives VCC1 = 3.1 V to 15 V)."
      },
      {
        "number": "2",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverted driver input (active high) with an internal noise filter and an internal weak pull-down that favors the off state."
      },
      {
        "number": "3",
        "name": "IN-",
        "type": "input",
        "description": "Inverted driver input (active low) with an internal noise filter and an internal weak pull-up that favors the off state."
      },
      {
        "number": "4",
        "name": "GND1",
        "type": "power_in",
        "description": "Logic ground, the ground connection of the input circuit, referenced for all pins 1 to 3."
      },
      {
        "number": "5",
        "name": "VEE2",
        "type": "power_in",
        "description": "Power ground, the reference ground of the output driving circuit, connected to the negative supply in a bipolar supply configuration."
      },
      {
        "number": "6",
        "name": "CLAMP",
        "type": "output",
        "description": "Active Miller clamp output that ties to VEE2 during off-state once the gate voltage drops below 2.0 V referred to VEE2, and should be connected directly to the IGBT gate."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "output",
        "description": "Combined source and sink driver output that switches between VCC2 and VEE2, is turned off on UVLO, and is held low by active shut-down during UVLO."
      },
      {
        "number": "8",
        "name": "VCC2",
        "type": "power_in",
        "description": "Positive power supply pin of the output driving circuit, which requires a blocking capacitor placed close to the pin and operates from 10 V to 35 V referred to VEE2."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet's pin table for the 1ED3122MC12H (Table 3, page 6) is the 8-pin PG-DSO-8 300 mil layou"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0791,
        "at": "2026-10-18T00:33:23"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590907596536688640",
        "pages": 20,
        "sha256": "8633c6933062e730",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "1ed3122mc12hxuma1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "1ed3122mc12hxuma1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2af48566a80b5236fe8c0338a918a8a67efb8f64b24b48c211b3209b2ed6962f",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}