3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown1812L400
LUTE · Resettable Fuses · 1812
1812L400 from LUTE, in a 1812. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LUTE |
| Package | 1812 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Hold current | I hold | 4 | A | 25℃ still air | 4 | ||
| Maximum fault current | I max | 40 | A | at rated voltage (V max) | 4 | ||
| Initial resistance (un-soldered) | R min | 0.005 | Ω | minimum resistance in initial (un-soldered) state | 4 | ||
| Time to trip | T trip | 4 | s | at 10.00 A, 25℃ | 4 | ||
| Ambient operating temperature | -40 | 85 | °C | ambient operating conditions | 8 | ||
| Maximum surface temperature in tripped state | 125 | ℃ | device in tripped state | 8 | |||
| Typical tripped power dissipation | P d typ. | 2 | W | tripped state, 25℃ still air | 4 |
CAD (KiCad official)
- Symbol:
1812L400 - Footprint:
Fuse:Fuse_1812_4532Metric - 3D model: 1812, generated on the KiCad land (body 4.5 x 3.2 mm, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LUTE datasheet (13 pp, sha256
4a6d47229be2750c, retrieved 2026-11-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).