component
π160U30
Public Made by Adomby adom
2Pai Semi Digital Isolators, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownπ160U30
2Pai Semi · Digital Isolators · SOIC-16
π160U30 from 2Pai Semi, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Supply Voltage for Isolator Side 1, operating from 3.0 V to 5.5 V per the recommended operating conditions. |
| 2 | VIA | input | Logic Input A; high-level input requires at least 0.7VDDx and low-level input at most 0.3VDDx. |
| 3 | VIB | input | Logic Input B; high-level input requires at least 0.7VDDx and low-level input at most 0.3VDDx. |
| 4 | VIC | input | Logic Input C; high-level input requires at least 0.7VDDx and low-level input at most 0.3VDDx. |
| 5 | VID | input | Logic Input D; high-level input requires at least 0.7VDDx and low-level input at most 0.3VDDx. |
| 6 | VIE | input | Logic Input E; high-level input requires at least 0.7VDDx and low-level input at most 0.3VDDx. |
| 7 | VIF | input | Logic Input F; high-level input requires at least 0.7VDDx and low-level input at most 0.3VDDx. |
| 8 | GND1 | power_in | Ground 1; this pin is the ground reference for Isolator Side 1. |
| 9 | GND2 | power_in | Ground 2; this pin is the ground reference for Isolator Side 2. |
| 10 | VOF | output | Logic Output F; drives the output to the preset fail-safe state (Low for the π160U30 variant) when the input side supply is not applied. |
| 11 | VOE | output | Logic Output E; drives the output to the preset fail-safe state (Low for the π160U30 variant) when the input side supply is not applied. |
| 12 | VOD | output | Logic Output D; drives the output to the preset fail-safe state (Low for the π160U30 variant) when the input side supply is not applied. |
| 13 | VOC | output | Logic Output C; drives the output to the preset fail-safe state (Low for the π160U30 variant) when the input side supply is not applied. |
| 14 | VOB | output | Logic Output B; drives the output to the preset fail-safe state (Low for the π160U30 variant) when the input side supply is not applied. |
| 15 | VOA | output | Logic Output A; drives the output to the preset fail-safe state (Low for the π160U30 variant) when the input side supply is not applied. |
| 16 | VDD2 | power_in | Supply Voltage for Isolator Side 2, operating from 3.0 V to 5.5 V per the recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 2Pai Semi |
| Package | SOIC-16 |
| Category | Interface ICs |
| Pins | 16 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pC | In accordance with DIN V VDE V 0884-10, eachπ160U3x/π161U3x/π162U3x /π163U3x is proof tested by applying an insulation test voltage ≥ 1326 V peak for 1 sec (partial discharge detection limit = 5 pC); | 8 |
CAD (KiCad official)
- Symbol:
π160U30 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
160u30-etched.step/160u30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);160u30.step/160u30.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 2Pai Semi datasheet (16 pp, sha256
a5dafaffd8f20e99, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).