150060VS75000 - Wurth WL-SMCW 0603 Bright Green Chip LED

{
 "schema": "adom/component-states@1",
 "mpn": "150060VS75000",
 "kind": "led",
 "default": "off",
 "states": [
  {
   "id": "off",
   "label": "Off",
   "summary": "No current: the water-clear lens as built, unlit, the die visible through it.",
   "models": {
    "step": "150060VS75000-off.step",
    "glb": "states/150060VS75000-off.glb"
   },
   "image": "states/150060VS75000-state-off.png",
   "when": {
    "text": "no forward current (unpowered, reverse biased, or below about 0.1 mA)"
   }
  },
  {
   "id": "on",
   "label": "On (bright green, 570 nm)",
   "summary": "Forward current flowing: the lens lit bright green.",
   "models": {
    "step": "150060VS75000.step",
    "glb": "states/150060VS75000-on.glb"
   },
   "image": "states/150060VS75000-state-on.png",
   "look": {
    "lit": "the materials the off model does not have (the lens)",
    "material": "lens_lit_570nm",
    "emissive_strength": 1.6,
    "glow": "#aaff28",
    "light": "point"
   },
   "when": {
    "forward_current_mA": [
     0.1,
     30
    ],
    "text": "forward current from A (pin 2) to K (pin 1) above about 0.1 mA, up to 30 mA continuous; (rail - 2.0 V) / R sets it (2.4 V max Vf at 20 mA)"
   }
  }
 ],
 "electrical": {
  "vf_V": 2.0,
  "vf_max_V": 2.4,
  "vf_test_current_mA": 20,
  "if_max_mA": 30,
  "if_peak_mA": 100,
  "vr_max_V": 5,
  "lambda_d_nm": 570,
  "lambda_peak_nm": 572,
  "iv_mcd_typ": 40,
  "iv_mcd_min": 12,
  "source": "Wurth Elektronik datasheet 150060VS75000 rev 002.009 (2019-02-26): p.1 Absolute Maximum Ratings (If 30 mA, If peak 100 mA at 1/10 duty 1 kHz, Vr 5 V), p.2 Electrical & Optical Properties (Vf 2.0 typ / 2.4 max, 570 nm dominant, 572 nm peak, 12 / 40 mcd at 20 mA)"
 },
 "pins": {
  "anode": "2",
  "cathode": "1"
 },
 "notes": [
  "The on model differs from the off model only in the lens material (checked: identical meshes, accessors and binary buffer; only material 2 changes).",
  "State images are step2glb (server-side) renders of each state's STEP; the on image adds a glow drawn only over the pixels where the two renders differ (the lens). They are not Adom 3D Viewer captures."
 ]
}