component

126RV0172

Public Made by Adom

by adom

KNSCHA Aluminum Electrolytic Capacitors - SMD, SMD,D5xL5.4mm. Polarised capacitor: pin 1 is + by the KiCad polarised-footprint convention, KiCad symbol/footprint/3D.

componentcapacitors126rv0172factory-2.0.0extractor-text

Verified 126RV0172

by Ray · last 11 Nov 2026 · 1 record, 1 retired · files match
SymbolFootprint3D modelPins

Verification log 2 records

11 Nov 2026RaySupersedes the earlier record: that check missed polarity (the pins said "unpolarised"; this capacitor is polarised): component-page-verify now PASSESfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: 126RV0172 · CP_Elec_5x5.4 · 2 pins
  • ✓copper: 2 copper pads, none touching another net
  • ✓datasheet: two-terminal part whose datasheet prints no pin numbers: pins 1 and 2 by library convention, no names to check
  • •distributor (warn): no ['digikey', 'mouser'] number
  • ✓family: CP_Elec_5x5.4
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-vjw8z8v8/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • ✓package_fit: height within the datasheet's package drawing (datasheet p.5)
  • ✓pads: 2 pins = 2 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 2 pins agree
  • ✓symbol_text: no pin names collide
  • ✓viewers: viewers/footprint.html 25 kB, viewers/symbol.html 6 kB
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ 126rv0172.kicad_sym✓ 126rv0172.kicad_mod✓ 126rv0172.step
6 Nov 2026RayPublished by the parts factory: tier lcsc, 2 pinssuperseded
SymbolFootprint3D modelPinsfor all variants
  • ✓component-page-verify: PASS
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: 126RV0172 · CP_Elec_5x5.4 · 2 pins
  • ✓copper: 2 copper pads, none touching another net
  • ✓datasheet: unpolarised two-terminal part: pins 1 and 2 by library convention, no names to check
  • •distributor (warn): no ['digikey', 'mouser'] number
  • ✓family: CP_Elec_5x5.4
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-vhqby9c3/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • ✓package_fit: height within the datasheet's package drawing (datasheet p.5)
  • ✓pads: 2 pins = 2 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 2 pins agree
  • ✓symbol_text: no pin names collide
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ 126rv0172.kicad_sym✓ 126rv0172.kicad_mod✓ 126rv0172.step
Retired by Ray on 11 Nov 2026: Retired: this check called a polarised capacitor an unpolarised two-terminal part. Fixed in component-page-verify 0.5.13 (an unrecorded polarity now fails) and 0.5.14 (the datasheet row no longer says unpolarised).
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

126RV0172

KNSCHA · Aluminum Electrolytic Capacitors - SMD · CP_Elec_5x5.4

126RV0172 from KNSCHA, in a CP_Elec_5x5.4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 + passive Positive terminal (pad 1 of the CP_ footprint; symbol and 3D mark the + end).
2 - passive Negative terminal.

Key specifications

Parameter Value
Manufacturer KNSCHA
Package CP_Elec_5x5.4
Category Capacitors
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Rated capacitance C 100 uF CK series, 10 V, Φ5x5.4 (Table-1 item 2, MPN 126RV0172) 1
Capacitance tolerance -20 20 % ±20% (M), at 20℃, 120Hz 2
Rated voltage VR 10 Vdc DC; do not apply DC voltage above rated voltage or reverse voltage 11
Surge voltage 11.5 V Short-term maximum DC over-voltage (Table-1 surge column) 1
Maximum ripple current 60 mArms 105℃, 120Hz 1
Leakage current IL 10 uA 20℃, rated voltage applied 2 minutes; ≤0.01CV or 3uA, whichever greater 2
Low-temperature impedance ratio Z(-25℃)/Z(20℃) Z(-25℃)/Z(20℃) 4 Φ4~Φ10, 120Hz, rated voltage 10 V 2
Low-temperature impedance ratio Z(-55℃)/Z(20℃) Z(-55℃)/Z(20℃) 6 Φ4~Φ10, 120Hz, rated voltage 10 V 2
Operating temperature range Top -55 105 ℃ Rated voltage 6.3~100 Vdc range 4
Endurance capacitance change ΔC/C -30 30 % 105℃, 1000 h, case Φ4~Φ5x5.7, rated voltage with ripple current, restored to 20℃ (see review_required) 2
Endurance dissipation factor tanδ 300 % of specified value 105℃ endurance test, ≤300% of specified value 2
Temperature rotational test capacitance change ΔC/C -10 10 % 50 cycles -55℃/+105℃, then 4 h standard atmosphere 8
High temperature endurance life capacitance change ΔC/C -30 30 % 105℃, rated life, bias voltage and ripple current applied 8
High temperature unload storage capacitance change ΔC/C -30 30 % 105℃, 1000+48/-0 h, no rated voltage applied 8
High temperature unload storage tanδ tanδ 300 % of specified value 105℃, 1000 h, no voltage; less than 300% of specified value 8
Humidity test capacitance change ΔC/C -10 10 % 60±3℃, 90~95%RH, 1000+48/-0 h 8
Low temperature test capacitance change ΔC/C -10 10 % -55±3℃, 96±4 h 9
Vibration test capacitance change ΔC/C -10 10 % 10-55 Hz, 1.5 mm total amplitude, 3 directions 2 h each 9
Surge voltage test capacitance change ΔC/C -20 20 % 1000 cycles at room temperature, 1 kΩ series resistor, 30±5 s charge, ~5.5 min discharge 9
Surge voltage test tanδ tanδ 175 % of specified value Surge test, less than 175% of specified value 9
Solder heat-resistance capacitance change ΔC/C -10 10 % Iron method: bit 350±5℃, 3+1/-0 s 9
Reflow peak temperature 260 ℃ Recommended IR reflow, Φ4~6.3 general type, max 2 reflows 7
Reflow time at peak temperature 5 s Peak temperature 260℃ max, Φ4~6.3 general type 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Copper tin 6 Lead Wire 引线 Bi Contained Tin Plate, Tinned Copper-Clad Steel Wire 镀锡铜包钢线 5

CAD (KiCad official)

  • Symbol: 126RV0172
  • Footprint: Capacitor_SMD:CP_Elec_5x5.4
  • 3D model: CP_Elec_5x5.4 (KiCad packages3D, STEP)
  • 3D model files: 126rv0172-etched.step / 126rv0172-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 126rv0172.step / 126rv0172.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: KNSCHA datasheet (12 pp, sha256 41ac4399abcafb5a, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF