component
11LC010T-E
Public Made by Adomby adom
Microchip Tech EEPROM, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdown11LC010T-E
Microchip Tech · EEPROM · SOT-23
11LC010T-E from Microchip Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCIO | bidirectional | Serial clock and data input/output pin that carries commands, addresses and data into and out of the device, with the clock embedded in the Manchester-encoded data stream. |
| 2 | VCC | power_in | Supply voltage pin; the 11LC010 is specified for a 2.5V to 5.5V VCC range. |
| 3 | VSS | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23 |
| Category | Memory |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Low-level output voltage | VOL | 0.4 | V | IOI = 300 A, VCC = 5.5V | 3 | ||
| Output current limit | IO | -4 | 4 | mA | VCC = 5.5V (Note 1) | 3 | |
| Output current limit | IO | -3 | 3 | mA | Vcc = 2.5V (Note 1) | 3 | |
| Input leakage current (SCIO) | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Internal capacitance (all inputs and outputs) | CINT | 7 | pF | TA = 25°C, FCLK = 1 MHz, VCC = 5.0V (Note 1) | 3 | ||
| Read operating current | ICC Read | 3 | mA | VCC=5.5V; FBUS=100 kHz, CB=100 pF | 3 | ||
| Read operating current | ICC Read | 1 | mA | VCC=2.5V; FBUS=100 kHz, CB=100 pF | 3 | ||
| Write operating current | ICC Write | 5 | mA | VCC = 5.5V | 3 | ||
| Write operating current | ICC Write | 3 | mA | VCC = 2.5V | 3 | ||
| Standby current | Iccs | 5 | µA | VCC = 5.5V TA = 125°C | 3 | ||
| Standby current | Iccs | 1 | µA | VCC = 5.5V TA = 85°C | 3 | ||
| Idle mode current | ICCI | 50 | µA | VCC = 5.5V | 3 | ||
| Low-level input voltage | VIL | -0.3 | V | VCC≥2.5V (upper limit printed as 0.3*VCC, not numeric) | 3 | ||
| Absolute maximum SCIO voltage w.r.t. VSS (lower limit) | SCIO | -0.6 | V | w.r.t. VSS (upper limit printed as VCC+1.0V, not numeric) | 3 | ||
| Serial bus frequency | FBUS | 10 | 100 | kHz | 4 | ||
| Bit period | TE | 10 | 100 | µs | 4 | ||
| Input edge jitter tolerance | TIJIT | -0.06 | 0.06 | UI | (Note 3) | 4 | |
| Serial bus frequency drift rate tolerance | FDRIFT | -0.5 | 0.5 | % | per byte | 4 | |
| Serial bus frequency drift limit | FDEV | -5 | 5 | % | per command | 4 | |
| Output edge jitter | TOJIT | -0.25 | 0.25 | UI | (Note 3) | 4 | |
| SCIO input rise time | TR | 100 | ns | (Note 1) | 4 | ||
| SCIO input fall time | TF | 100 | ns | (Note 1) | 4 | ||
| Standby pulse time | TSTBY | 600 | µs | 4 | |||
| Start header setup time | TSS | 10 | µs | 4 | |||
| Start header low pulse time | THDR | 5 | µs | 4 | |||
| Input filter spike suppression (SCIO) | TSP | 50 | ns | (Note 1) | 4 | ||
| Write cycle time (byte or page) | TWC | 5 | ms | Write, WRSR commands | 4 | ||
| Write cycle time (ERAL, SETAL) | TWC | 10 | ms | ERAL, SETAL commands | 4 | ||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature under bias | -40 | 125 | °C | 3 | |||
| ESD protection on all pins | 4 | kV | 3 | ||||
| Supply voltage range | VCC | 2.5 | 5.5 | V | 11LC010 (2.5-5.5V range) | 2 | |
| Ambient temperature, Industrial (I) | TA | -40 | 85 | °C | Industrial (I) grade | 3 | |
| Ambient temperature, Automotive (E) | TA | -40 | 125 | °C | Automotive (E) grade | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Package: P = 8-lead Plastic DIP (300 mil body) SN = 8-lead Plastic SOIC (3.90 mm body) | 45 |
CAD (KiCad official)
- Symbol:
11LC010T-E - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
11lc010t-e-etched.step/11lc010t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);11lc010t-e.step/11lc010t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (48 pp, sha256
705b144baefc8615, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).