10164227-1001A1RLF

{
 "plan": {
  "schema": "adom/mark-plan@1",
  "mpn": "10164227-1001A1RLF",
  "step": "10164227-1001a1rlf-housing.step",
  "footprint": "10164227-1001a1rlf.kicad_mod",
  "standUp": [],
  "standUpSource": "as-is (Z up)",
  "inputs": {
   "up": "auto",
   "face": "side",
   "along": null,
   "upSupplied": false,
   "faceSupplied": true,
   "faceSource": "--face side"
  },
  "face": "side",
  "pin1": {
   "source": "footprint pad 1",
   "xyMm": [
    9.8,
    1.32
   ],
   "corner": "left/lower"
  },
  "existingMarks": [],
  "vendorMarking": {
   "present": false,
   "glyphFaces": 0
  },
  "faceNormal": [
   -0.0,
   1.0,
   0.0
  ],
  "longAxis": {
   "axis": "x",
   "vector": [
    1.0,
    0.0,
    0.0
   ],
   "why": "long side wall (22.60 mm)",
   "source": "side-wall",
   "override": null,
   "pinRows": {
    "axis": "x",
    "pinsPerRow": [
     50,
     50
    ],
    "rowSpacingMm": 2.64,
    "exposed": 0
   }
  },
  "readingDirection": {
   "vector": [
    -1.0,
    -0.0,
    0.0
   ],
   "angleDeg": 180,
   "textUp": [
    0.0,
    -1.0,
    0.0
   ],
   "rule": "pin 1 / pad 1 at the start (left) of the text, and below it when it sits on a side"
  },
  "band": {
   "regionMm": [
    -11.3,
    -1.45,
    11.3,
    -0.05
   ],
   "zMm": 1.5,
   "lengthMm": 22.6,
   "heightMm": 1.4,
   "why": "flat high band of the side wall",
   "terminationsExcludedBy": null,
   "trimmedEnds": [],
   "keepouts": [],
   "sideTurn": {
    "axis": "x",
    "quarterTurns": 1,
    "textUpInTurnedFrame": [
     0,
     -1,
     0
    ],
    "baselineInTurnedFrame": [
     -1.0,
     -0.0,
     -0.0
    ]
   },
   "margins": {
    "lengthEachSide": 0.12,
    "heightEachSide": 0.15
   }
  },
  "text": {
   "lines": [
    "10164227-1001A1RLF"
   ],
   "chars": 18,
   "capHeightMm": 0.98,
   "smallestLineMm": 0.98,
   "heightPctOfBand": 70.0,
   "why": "one line (two lines would give 0.426 mm on the smaller line, not 1.15x larger)",
   "alternative": {
    "lines": [
     "10164227-",
     "1001A1RLF"
    ],
    "capHeightMm": 0.4261,
    "smallestLineMm": 0.4261
   },
   "font": "service-step2glb /laser-etch (single-stroke outline font)"
  },
  "etch": {
   "poseQuarterTurnsZ": 2,
   "service": "/laser-etch?mode=flat",
   "note": "turn so the reading direction is +X, etch, fit the mark into the band, turn back"
  },
  "outline": {
   "upAxis": "z",
   "poseRotZDeg": 0,
   "rot": 180,
   "recipe": "adom-aiflow-etch outline <part.step> --footprint <part.kicad_mod> --mpn 10164227-1001A1RLF (stands the STEP up (as-is (Z up)), turns it 0 deg about Z and draws 10164227-1001A1RLF on the planned band, rot 180)",
   "why": "iso camera looks from +X+Y+Z: text along +Y (rot 90) or -X (rot 180) reads left to right with pin 1 toward the viewer"
  },
  "widget": {
   "px": 320,
   "pxPerMm": 15.91,
   "capHeightPx": 12.7
  },
  "hints": [
   "LED: the top window stays clear; the mark goes on the front long wall"
  ],
  "warnings": [],
  "summary": "Mark along the 22.60 mm axis (-X), 0.98 mm text, upright with pin 1 left lower, outline rot 180 after a 0 deg pose turn; ~13 px caps at 320 px"
 },
 "etch": {
  "out": "10164227-1001a1rlf-etched-housing.step",
  "mpn": "10164227-1001A1RLF",
  "lines": [
   "10164227-1001A1RLF"
  ],
  "removedOldMarks": [],
  "turns": [
   {
    "axis": "x",
    "quarterTurns": 1
   },
   {
    "axis": "z",
    "quarterTurns": 2
   }
  ],
  "serviceMarkTurnedQuarter": 0,
  "line2Scaled": false,
  "fit": {
   "scale": 1.0,
   "capMm": 0.9434,
   "markMm": [
    13.9468,
    0.98
   ],
   "bandMm": [
    22.6,
    1.4
   ],
   "zMm": 1.505
  }
 }
}