component

1010631010TR

Public Made by Adom

by adom

NJCON Polymer Aluminum Capacitors, SMD,D10xL10mm. Polarised capacitor: pin 1 is + by the KiCad polarised-footprint convention, KiCad symbol/footprint/3D.

componentcapacitors1010631010trfactory-2.0.0extractor-text

Verified 1010631010TR

by Ray · last 11 Nov 2026 · 1 record, 1 retired · files match
SymbolFootprint3D modelPins

Verification log 2 records

11 Nov 2026RaySupersedes the earlier record: that check missed polarity (the pins said "unpolarised"; this capacitor is polarised): component-page-verify now PASSESfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: 1010631010TR · CP_Elec_10x10 · 2 pins
  • ✓copper: 2 copper pads, none touching another net
  • ✓datasheet: two-terminal part whose datasheet prints no pin numbers: pins 1 and 2 by library convention, no names to check
  • •distributor (warn): no ['digikey', 'mouser'] number
  • ✓family: CP_Elec_10x10
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-u75bdrbp/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • •package_fit (skip): no component.package_dims on the page: the model is unchecked against the datasheet drawing
  • ✓pads: 2 pins = 2 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 2 pins agree
  • ✓symbol_text: no pin names collide
  • ✓viewers: viewers/footprint.html 31 kB, viewers/symbol.html 6 kB
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ 1010631010tr.kicad_sym✓ 1010631010tr.kicad_mod✓ 1010631010tr.step
6 Nov 2026RayPublished by the parts factory: tier lcsc, 2 pinssuperseded
SymbolFootprint3D modelPinsfor all variants
  • ✓component-page-verify: PASS
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: 1010631010TR · CP_Elec_10x10 · 2 pins
  • ✓copper: 2 copper pads, none touching another net
  • ✓datasheet: unpolarised two-terminal part: pins 1 and 2 by library convention, no names to check
  • •distributor (warn): no ['digikey', 'mouser'] number
  • ✓family: CP_Elec_10x10
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-1gv66dxb/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • •package_fit (skip): no component.package_dims on the page: the model is unchecked against the datasheet drawing
  • ✓pads: 2 pins = 2 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 2 pins agree
  • ✓symbol_text: no pin names collide
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ 1010631010tr.kicad_sym✓ 1010631010tr.kicad_mod✓ 1010631010tr.step
Retired by Ray on 11 Nov 2026: Retired: this check called a polarised capacitor an unpolarised two-terminal part. Fixed in component-page-verify 0.5.13 (an unrecorded polarity now fails) and 0.5.14 (the datasheet row no longer says unpolarised).
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers 1010631010tr: viewers · Ray
1010631010tr-etched.glb Publish 0.1.0 · Ray
1010631010tr-etched.step 1010631010tr: factory component page (tier=lcsc) · Ray
1010631010tr-hero.glb Publish 0.1.1 · Ray
1010631010tr-hero.overlay.json Publish 0.1.1 · Ray
1010631010tr.glb Publish 0.1.0 · Ray
1010631010tr.kicad_mod Publish 0.1.0 · Ray
1010631010tr.kicad_sym Publish 0.1.0 · Ray
1010631010tr.lbr Publish 0.1.0 · Ray
1010631010tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Polarity: pin 1 = +, 2 = - (symbol, footprint and 3D agree); brief and README corrected · Ray
verification.json Retire verification record #0 · Ray

1010631010TR

NJCON · Polymer Aluminum Capacitors · CP_Elec_10x10

1010631010TR from NJCON, in a CP_Elec_10x10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 + passive Positive terminal (pad 1 of the CP_ footprint; symbol and 3D mark the + end).
2 - passive Negative terminal.

Key specifications

Parameter Value
Manufacturer NJCON
Package CP_Elec_10x10
Category Capacitors
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Nominal capacitance tolerance -20 20 % measured at 20℃, 120Hz, 0.5Vrms 5
Operating temperature range -55 105 ℃ at rated voltage 4
Recommended working voltage 70 80 % of rated voltage prolongs capacitor life 12
Maximum permissible ripple current 3000 mA 105℃, 100kHz 3
Leakage current I 1260 µA 20℃, 2 min, rated voltage via 1000Ω protective resistor (catalog value) 3
Reflow peak temperature at top of capacitor T 235 ℃ Φ10×10.5L / 12.5L case group 11
Time above 200℃ at top of capacitor t 60 s Φ10×10.5L / 12.5L case group, reflow 11
Time above 230℃ at top of capacitor t1 30 s Φ10×10.5L / 12.5L case group, reflow 11
Preheat time 180 s preheat at 100℃~200℃ 11
Change in capacitance after low temperature test -10 10 % stored at -55℃ for 72 h, measured after 1 to 2 h at standard conditions 8
Change in capacitance after temperature cycle -10 10 % 5 cycles per Figure 1, measured after 1 to 2 h at standard conditions 8
Change in capacitance after soldering heat -10 10 % solder 260±5℃, immersion 10±1 s 6
Change in capacitance after surge test -10 10 % 1000 cycles at surge voltage, specified temperature 6
Change in capacitance after damp heat -20 20 % 60±2℃, 90 to 95% RH, 240±8 h 7
Tgδ after damp heat tgδ 150 % of initial value 60±2℃, 90 to 95% RH, 240±8 h 7
ESR after damp heat ESR 150 % of initial value 60±2℃, 90 to 95% RH, 240±8 h 7
Change in capacitance after shelf life -20 20 % +105℃ storage, no voltage applied, 1000 h 7
Tgδ after shelf life tgδ 200 % of initial value +105℃ storage, no voltage applied, 1000 h 7
ESR after shelf life ESR 200 % of initial value +105℃ storage, no voltage applied, 1000 h 7
Nominal capacitance C 100 µF 3
Rated voltage UR 63 V 3
Tgδ (dissipation factor) tgδ 0.12 20℃, 120Hz, 0.5Vrms (catalog value) 3
Equivalent series resistance ESR 35 mΩ 20℃, 100kHz, 0.5Vrms (catalog value) 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 3 引出线 Lead 铝线+镀锡铜钢线 9

CAD (KiCad official)

  • Symbol: 1010631010TR
  • Footprint: Capacitor_SMD:CP_Elec_10x10
  • 3D model: CP_Elec_10x10 (KiCad packages3D, STEP)
  • 3D model files: 1010631010tr-etched.step / 1010631010tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 1010631010tr.step / 1010631010tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NJCON datasheet (13 pp, sha256 fce2a72d03f9b3e9, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF