main
Ray
Publish 0.1.0
b5dabfb
1.25-2P WT
SHOU HAN · Wire To Board Connector · Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal
1.25-2P WT from SHOU HAN, in a Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SHOU HAN |
| Package | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal |
| Category | Connectors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Contact resistance (rated, table 5.2) | 20 | mΩ | 4 | ||||
| Insulation resistance (table 5.4) | 100 | MΩ | 4 | ||||
| Dielectric strength (table 5.5) | 500 | V AC/minute | 4 | ||||
| Male contact retention force (6.1) | 15 | N | per pin | 4 | |||
| Female contact retention force (6.2) | 15 | N | per pin | 4 | |||
| Plug-in force (6.3) | 3 | N | per pin | 4 | |||
| Plug-out force (6.4) | 0.5 | N | per pin | 4 | |||
| Solder area coverage (7.1) | 95 | % | Soldering time 2.5±0.5 S at 250±5 ℃ | 4 | |||
| Rated voltage (table 5.1) | 125 | V | AC/DC | 4 | |||
| Rated current (table 5.1) | 1 | A | AC/DC | 4 | |||
| Contact resistance after heat test (7.3) | 20 | mΩ | 96 h at +85±3 ℃ | 5 | |||
| Contact resistance after cold test (7.4) | 20 | mΩ | 48 h at -25±3 ℃ | 5 | |||
| Contact resistance after temperature cycling (7.5) | 20 | mΩ | 5 cycles, low -25±3 ℃, high -85±3 ℃ as printed | 5 | |||
| Contact resistance after humidity test (7.6) | 20 | mΩ | 96 h at 60±2 ℃, 90-96% RH | 5 | |||
| Insulation resistance after humidity test (7.6) | 100 | MΩ | 96 h at 60±2 ℃, 90-96% RH | 5 | |||
| Contact resistance after salt spray test (7.7) | 20 | mΩ | Salt 5±1%, 35±2 ℃, 16±2 h | 5 | |||
| Ambient operating temperature range | -25 | 85 | ℃ | Use condition, section 2.1 | 3 | ||
| Applicable PC board thickness | 0.6 | 1.2 | mm | Section 2.2 use condition | 3 | ||
| Storage temperature | -10 | 40 | ℃ | Storage of packed connector | 6 | ||
| Storage relative humidity | 80 | % | Storage of packed connector | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Nylon | Plastic 塑 壳 Nylon66 UL94V-0 | 3 | |
| contacts | Phosphor bronze | Contact Phosphor bronze | 3 |
CAD (KiCad official)
- Symbol:
1.25-2P WT - Footprint:
Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal - 3D model: Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal (KiCad packages3D, STEP)
- 3D model files:
1-25-2p-wt-etched.step/1-25-2p-wt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);1-25-2p-wt.step/1-25-2p-wt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SHOU HAN datasheet (6 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 1.25-2P WT
**SHOU HAN** · Wire To Board Connector · Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal
1.25-2P WT from SHOU HAN, in a Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SHOU HAN |
| Package | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal |
| Category | Connectors |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Contact resistance (rated, table 5.2) | | | | 20 | mΩ | | 4 |
| Insulation resistance (table 5.4) | | 100 | | | MΩ | | 4 |
| Dielectric strength (table 5.5) | | 500 | | | V AC/minute | | 4 |
| Male contact retention force (6.1) | | 15 | | | N | per pin | 4 |
| Female contact retention force (6.2) | | 15 | | | N | per pin | 4 |
| Plug-in force (6.3) | | | | 3 | N | per pin | 4 |
| Plug-out force (6.4) | | 0.5 | | | N | per pin | 4 |
| Solder area coverage (7.1) | | 95 | | | % | Soldering time 2.5±0.5 S at 250±5 ℃ | 4 |
| Rated voltage (table 5.1) | | | | 125 | V | AC/DC | 4 |
| Rated current (table 5.1) | | | | 1 | A | AC/DC | 4 |
| Contact resistance after heat test (7.3) | | | | 20 | mΩ | 96 h at +85±3 ℃ | 5 |
| Contact resistance after cold test (7.4) | | | | 20 | mΩ | 48 h at -25±3 ℃ | 5 |
| Contact resistance after temperature cycling (7.5) | | | | 20 | mΩ | 5 cycles, low -25±3 ℃, high -85±3 ℃ as printed | 5 |
| Contact resistance after humidity test (7.6) | | | | 20 | mΩ | 96 h at 60±2 ℃, 90-96% RH | 5 |
| Insulation resistance after humidity test (7.6) | | 100 | | | MΩ | 96 h at 60±2 ℃, 90-96% RH | 5 |
| Contact resistance after salt spray test (7.7) | | | | 20 | mΩ | Salt 5±1%, 35±2 ℃, 16±2 h | 5 |
| Ambient operating temperature range | | -25 | | 85 | ℃ | Use condition, section 2.1 | 3 |
| Applicable PC board thickness | | 0.6 | | 1.2 | mm | Section 2.2 use condition | 3 |
| Storage temperature | | -10 | | 40 | ℃ | Storage of packed connector | 6 |
| Storage relative humidity | | | | 80 | % | Storage of packed connector | 6 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Nylon | | Plastic 塑 壳 Nylon66 UL94V-0 | 3 |
| contacts | Phosphor bronze | | Contact Phosphor bronze | 3 |
## CAD (KiCad official)
- Symbol: `1.25-2P WT`
- Footprint: `Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal`
- 3D model: Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal (KiCad packages3D, STEP)
- 3D model files: `1-25-2p-wt-etched.step` / `1-25-2p-wt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `1-25-2p-wt.step` / `1-25-2p-wt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SHOU HAN datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8618866177728651264) (6 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `connector numbering` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/1-25-2p-wt-datasheet.pdf)