main
Ray
Publish 0.1.0
9dcfbd8
1.25-10P WT
SHOU HAN · Wire To Board Connector · Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal
1.25-10P WT from SHOU HAN, in a Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
| 7 | 7 | passive | Contact 7; numbering follows the footprint. |
| 8 | 8 | passive | Contact 8; numbering follows the footprint. |
| 9 | 9 | passive | Contact 9; numbering follows the footprint. |
| 10 | 10 | passive | Contact 10; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SHOU HAN |
| Package | Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal |
| Category | Connectors |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated voltage | 125 | V AC/DC | 4 | ||||
| Rated current | 1 | A | AC DC | 4 | |||
| Contact resistance | 20 | mΩ | 4 | ||||
| Insulation resistance | 100 | MΩ | 4 | ||||
| Dielectric strength | 500 | V AC | AC/minute | 4 | |||
| Male contact retention force | 10 | N per pin | 4 | ||||
| Female contact retention force | 10 | N per pin | 4 | ||||
| Plug-in force | 3 | N per pin | 4 | ||||
| Plug-out force | 0.5 | N per pin | 4 | ||||
| Solderability area | 95 | % | Time 2.5±0.5 S; Temperature 260±5 ℃ | 4 | |||
| Contact resistance after heat test | 20 | mΩ | Heat test: 96 h at +85±3 ℃ | 5 | |||
| Contact resistance after cold test | 20 | mΩ | Cold test: 48 h at -25±3 ℃ | 5 | |||
| Contact resistance after temperature cycling | 20 | mΩ | 5 cycles, -25±3 ℃ to -85±3 ℃ as printed | 5 | |||
| Contact resistance after constant humidity heat | 20 | mΩ | 60±2 ℃, 90%-96% RH, 96 h | 5 | |||
| Insulation resistance after constant humidity heat | 100 | MΩ | 60±2 ℃, 90%-96% RH, 96 h | 5 | |||
| Ambient operating temperature | -25 | 85 | ℃ | Section 2.1 Use condition | 3 | ||
| Applicable PC board thickness | 1.2 | 1.6 | mm | Section 2.2 Use condition | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Nylon | Plastic 塑 壳 Nylon66 UL94V-0 | 3 | |
| contacts | Phosphor bronze | Contact Phosphor bronze | 3 |
CAD (KiCad official)
- Symbol:
1.25-10P WT - Footprint:
Connector_Molex:Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal - 3D model: Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal (KiCad packages3D, STEP)
- 3D model files:
1-25-10p-wt-etched.step/1-25-10p-wt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);1-25-10p-wt.step/1-25-10p-wt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SHOU HAN datasheet (5 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 1.25-10P WT
**SHOU HAN** · Wire To Board Connector · Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal
1.25-10P WT from SHOU HAN, in a Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
| 7 | 7 | passive | Contact 7; numbering follows the footprint. |
| 8 | 8 | passive | Contact 8; numbering follows the footprint. |
| 9 | 9 | passive | Contact 9; numbering follows the footprint. |
| 10 | 10 | passive | Contact 10; numbering follows the footprint. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SHOU HAN |
| Package | Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal |
| Category | Connectors |
| Pins | 10 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated voltage | | | | 125 | V AC/DC | | 4 |
| Rated current | | | | 1 | A | AC DC | 4 |
| Contact resistance | | | | 20 | mΩ | | 4 |
| Insulation resistance | | 100 | | | MΩ | | 4 |
| Dielectric strength | | 500 | | | V AC | AC/minute | 4 |
| Male contact retention force | | 10 | | | N per pin | | 4 |
| Female contact retention force | | 10 | | | N per pin | | 4 |
| Plug-in force | | | | 3 | N per pin | | 4 |
| Plug-out force | | 0.5 | | | N per pin | | 4 |
| Solderability area | | 95 | | | % | Time 2.5±0.5 S; Temperature 260±5 ℃ | 4 |
| Contact resistance after heat test | | | | 20 | mΩ | Heat test: 96 h at +85±3 ℃ | 5 |
| Contact resistance after cold test | | | | 20 | mΩ | Cold test: 48 h at -25±3 ℃ | 5 |
| Contact resistance after temperature cycling | | | | 20 | mΩ | 5 cycles, -25±3 ℃ to -85±3 ℃ as printed | 5 |
| Contact resistance after constant humidity heat | | | | 20 | mΩ | 60±2 ℃, 90%-96% RH, 96 h | 5 |
| Insulation resistance after constant humidity heat | | 100 | | | MΩ | 60±2 ℃, 90%-96% RH, 96 h | 5 |
| Ambient operating temperature | | -25 | | 85 | ℃ | Section 2.1 Use condition | 3 |
| Applicable PC board thickness | | 1.2 | | 1.6 | mm | Section 2.2 Use condition | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Nylon | | Plastic 塑 壳 Nylon66 UL94V-0 | 3 |
| contacts | Phosphor bronze | | Contact Phosphor bronze | 3 |
## CAD (KiCad official)
- Symbol: `1.25-10P WT`
- Footprint: `Connector_Molex:Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal`
- 3D model: Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal (KiCad packages3D, STEP)
- 3D model files: `1-25-10p-wt-etched.step` / `1-25-10p-wt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `1-25-10p-wt.step` / `1-25-10p-wt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SHOU HAN datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903544121798656) (5 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `connector numbering` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/1-25-10p-wt-datasheet.pdf)