component
0ZCM0010FF2G
Public Made by Adomby adom
Bel Fuse Resettable Fuses, 0603. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown0ZCM0010FF2G
Bel Fuse · Resettable Fuses · 0603
0ZCM0010FF2G from Bel Fuse, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Bel Fuse |
| Package | 0603 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Hold current (maximum current that does not trip, still air) | IH | 0.1 | A | Still air, 23°C | 1 | ||
| Trip current (minimum current that trips) | IT | 0.25 | A | Still air, 23°C | 1 | ||
| Rated voltage (maximum voltage device can withstand at rated current) | Vmax | 15 | V | At its rated current | 1 | ||
| Maximum fault current at rated voltage | Imax | 40 | A | At rated voltage (Vmax) | 1 | ||
| Typical power dissipated in tripped state | Pd | 0.5 | W | Tripped state, 23°C still air | 1 | ||
| Maximum time to trip | 0.1 | Sec | At 0.70 A | 1 | |||
| Minimum device resistance (initial, un-soldered) | Rmin | 0.9 | Ω | 23°C, initial un-soldered state | 1 | ||
| Maximum device resistance (1 hour after trip or after soldering) | R1max | 8 | Ω | 23°C, 1 hour after initial trip, or after soldering to PCB | 1 | ||
| Operating temperature range | -40 | 85 | °C | 1 | |||
| Hold current temperature derating at -40°C | IH | 163 | % | Temperature -40°C, percent of hold current at 23°C | 3 | ||
| Hold current temperature derating at -20°C | IH | 143 | % | Temperature -20°C, percent of hold current at 23°C | 3 | ||
| Hold current temperature derating at 0°C | IH | 123 | % | Temperature 0°C, percent of hold current at 23°C | 3 | ||
| Hold current temperature derating at 23°C | IH | 100 | % | Temperature 23°C, percent of hold current at 23°C | 3 | ||
| Hold current temperature derating at 30°C | IH | 95 | % | Temperature 30°C, percent of hold current at 23°C | 3 | ||
| Hold current temperature derating at 40°C | IH | 88 | % | Temperature 40°C, percent of hold current at 23°C | 3 | ||
| Hold current temperature derating at 50°C | IH | 80 | % | Temperature 50°C, percent of hold current at 23°C | 3 | ||
| Hold current temperature derating at 60°C | IH | 72 | % | Temperature 60°C, percent of hold current at 23°C | 3 | ||
| Hold current temperature derating at 70°C | IH | 66 | % | Temperature 70°C, percent of hold current at 23°C | 3 | ||
| Hold current temperature derating at 85°C | IH | 56 | % | Temperature 85°C, percent of hold current at 23°C | 3 |
CAD (KiCad official)
- Symbol:
0ZCM0010FF2G - Footprint:
Fuse:Fuse_0603_1608Metric - 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files:
0zcm0010ff2g-etched.step/0zcm0010ff2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);0zcm0010ff2g.step/0zcm0010ff2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Bel Fuse datasheet (4 pp, sha256
f0999a1e083380ae, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).