component
0ZCG0014FF2C
Public Made by Adomby adom
Bel Fuse Resettable Fuses, 1812. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown0ZCG0014FF2C
Bel Fuse · Resettable Fuses · 1812
0ZCG0014FF2C from Bel Fuse, in a 1812. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One terminal of the non-polarized PTC (hold current 0.14 A, trip current 0.30 A, rated 60 Vdc, max fault current 10 A). |
| 2 | 2 | passive | Second terminal of the non-polarized PTC (Rmin 0.008 ohm, R1max 6.500 ohm; terminations are matte tin plated copper). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Bel Fuse |
| Package | 1812 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Hold current (IH) - maximum current without tripping | IH | 0.14 | A | still air at 23°C | 1 | ||
| Trip current (IT) - minimum current that trips the device | IT | 0.3 | A | still air at 23°C | 1 | ||
| Rated voltage (Vmax) | Vmax | 60 | Vdc | maximum voltage device can withstand at its rated current | 1 | ||
| Maximum fault current (Imax) | Imax | 10 | A | at rated voltage (Vmax) | 1 | ||
| Typical power dissipated in tripped state (Pd) | Pd | 0.8 | W | tripped state, 23°C still air | 1 | ||
| Max time to trip | 0.008 | Sec | at 8.0 A current | 1 | |||
| Minimum device resistance (Rmin) | Rmin | 1.2 | Ohms | 23°C, initial un-soldered state | 1 | ||
| Maximum device resistance (R1max) | R1max | 6.5 | Ohms | 23°C, 1 hour after initial trip or after soldering to PCB | 1 | ||
| Operating temperature range | -40 | 85 | °C | Maximum Voltage Temperature Range per product features | 1 | ||
| Temperature derating - hold current percent at -40°C | 167 | % | percent of IH; 0010, 0014 and 0020 group; ambient -40°C | 3 | |||
| Temperature derating - hold current percent at -20°C | 150 | % | percent of IH; 0010, 0014 and 0020 group; ambient -20°C | 3 | |||
| Temperature derating - hold current percent at 0°C | 133 | % | percent of IH; 0010, 0014 and 0020 group; ambient 0°C | 3 | |||
| Temperature derating - hold current percent at 23°C | 100 | % | percent of IH; 0010, 0014 and 0020 group; ambient 23°C | 3 | |||
| Temperature derating - hold current percent at 30°C | 93 | % | percent of IH; 0010, 0014 and 0020 group; ambient 30°C | 3 | |||
| Temperature derating - hold current percent at 40°C | 83 | % | percent of IH; 0010, 0014 and 0020 group; ambient 40°C | 3 | |||
| Temperature derating - hold current percent at 50°C | 73 | % | percent of IH; 0010, 0014 and 0020 group; ambient 50°C | 3 | |||
| Temperature derating - hold current percent at 60°C | 63 | % | percent of IH; 0010, 0014 and 0020 group; ambient 60°C | 3 | |||
| Temperature derating - hold current percent at 70°C | 51 | % | percent of IH; 0010, 0014 and 0020 group; ambient 70°C | 3 | |||
| Temperature derating - hold current percent at 85°C | 33 | % | percent of IH; 0010, 0014 and 0020 group; ambient 85°C | 3 |
CAD (KiCad official)
- Symbol:
0ZCG0014FF2C - Footprint:
Fuse:Fuse_1812_4532Metric - 3D model: 1812, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal 1806 height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
0zcg0014ff2c-etched.step/0zcg0014ff2c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);0zcg0014ff2c.step/0zcg0014ff2c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Bel Fuse datasheet (4 pp, sha256
73d80b0e34af55e7, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).