0901303108

{
 "slug": "0901303108",
 "mpn": "0901303108",
 "date": "2026-10-28",
 "source": {
  "tier": 1,
  "kind": "manufacturer",
  "manufacturer": "Molex",
  "file": "vendor/0901303108-molex-original.step",
  "original_name": "901303108.stp in 901303108_stp.zip",
  "format": "STEP AP203 (CONFIG_CONTROL_DESIGN), Pro/ENGINEER export 2013-04-05, one fused solid, no colour",
  "sha256": "5f6424ff70dce14c77fd039dc6dce3ecaebb961b9e289fb2cefa5175d574408f",
  "zip_url": "https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/3dcadmodels/901/90130/901303108_stp.zip",
  "zip_sha256": "6e8e3e9505fc17d6a2180036ce39569808e085fa37fa6bcb3adb70aeef3e10ae",
  "source_page": "https://www.molex.com/en-us/products/part-detail/901303108",
  "retrieved": "2026-10-27",
  "ruling": "Caleb 2026-10-28: follow Ray's trend (publish the manufacturer's own STEP, posed, on the CC-BY-SA page, as adom/670688000 does).",
  "site_terms": "molex.com Legal: 'The entire content (images and text) of this Website is copyrighted and may not be distributed, downloaded, modified, reused, reposted or otherwise used, except as provided herein, without the express written permission of Molex. Content from the Website may be downloaded and used only for the purpose of evaluating Molex's products for use in an application.' The STEP zip carries no licence of its own.",
  "site_terms_url": "https://www.molex.com/en-us/about/legal"
 },
 "transform": {
  "description": "Rotation and translation only; the original solid is wrapped in an assembly that carries the location (XCAF), so the Molex geometry and attributes are unchanged.",
  "rotation_rows_in_source_axes": [
   [
    0,
    -1,
    0
   ],
   [
    -1,
    0,
    0
   ],
   [
    0,
    0,
    -1
   ]
  ],
  "translate_mm_after_rotation": [
   -7.628,
   -3.81,
   4.8761
  ],
  "tail_check": {
   "tails": 8,
   "pads": 8,
   "max_offset_mm": 0.0
  }
 },
 "drawing_check": "provenance/drawing_check.json",
 "etch": "adom-chip-laser etch <slug>.step <MPN> (top face) -> <slug>-etched.step; GLBs by step2glb convert",
 "outputs": {
  "0901303108.step": "b4287fa58c383280359835405b0c41130606fcd302ebdefd4895e5945349ab8f",
  "0901303108-etched.step": "0bce2b6cecd2664bffa3b78be957eeea709fa9cd032ceb08b8cbe940e83798d9",
  "0901303108.glb": "faeabf6c44f743e67e5dcc738e120de0ad9cc723c8e900ac5f24b6eaf71913ab",
  "0901303108-etched.glb": "4559d42e1315f18e092644fae534bb54012240319895b0f3b15deb511439899a"
 },
 "previous": {
  "file": "provenance/previous/PinSocket_2x04_P2.54mm_Vertical.step",
  "note": "KiCad PinSocket_2x04_P2.54mm_Vertical (CC-BY-SA-4.0) placed from the source board: a vertical socket, not this part."
 },
 "checks": [
  {
   "text": "3D: Molex's own STEP 901303108.stp for 90130-3108 (STEP AP203 (CONFIG_CONTROL_DESIGN), Pro/ENGINEER export 2013-04-05, one fused solid, no colour), from the 3D CAD model link on the Molex product page (https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/3dcadmodels/901/90130/901303108_stp.zip, retrieved 2026-10-27; zip sha256 6e8e3e9505fc, STEP sha256 5f6424ff70dc); original bytes kept as vendor/0901303108-molex-original.step.",
   "result": "pass"
  },
  {
   "text": "Posed by rotation and translation only (provenance/tools/pose_vendor.py): new X, Y, Z = Molex axes [[0, -1, 0], [-1, 0, 0], [0, 0, -1]], then translate [-7.628, -3.81, 4.8761] mm; seat (lowest housing level, found by bisection) on z = 0, mating face toward -X; all 8 tails land on their drilled pads (max offset 0.000 mm); footprint binding identity.",
   "result": "pass"
  },
  {
   "text": "Molex model against SDA-90130 rev CA6 (provenance/tools/measure_vendor.py, provenance/drawing_check.json): B width 12.50 +-0.20 12.5 (drawing 12.5); height 9.75 +-0.30 9.751 (drawing 9.75); tail 2.90 +-0.30 2.899 (drawing 2.9); cavity 6.35 +0.10/-0.44 6.35 (drawing 6.35); raised underside to top 8.20 +-0.20 8.2 (drawing 8.2); cavity floor to top 7.35 +0.08/-0.30 7.275 (drawing 7.35); C cavity width 10.66 +-0.13 10.66 (drawing 10.66); face to reference 7.68 +-0.20 7.68 (drawing 7.68); reference to CKT#2 tail 2.858 +0.30/-0 2.858 (drawing 2.858); depth 10.90 +-0.20 (end wall) 10.9 (drawing 10.9); latch window 3.85 3.936 (drawing 3.85): all within the drawing tolerances.",
   "result": "pass"
  },
  {
   "text": "Sheet 3 is not to scale, so no overlay; the printed dimensions above were measured on the posed model instead.",
   "result": "note"
  },
  {
   "text": "Colour: none in the Molex file (AP203, one fused solid); nothing to keep, GLB uncoloured.",
   "result": "note"
  }
 ]
}