component
0805L200SL6ARG
Public Made by Adomby adom
LUTE Resettable Fuses, 0805. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
0805L200SL6ARG
LUTE · Resettable Fuses · 0805
0805L200SL6ARG from LUTE, in a 0805. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One terminal of the non-polarized resettable PPTC; rated 2.00 A hold, 4.00 A trip, 6.0 Vdc max, 50 A max fault current. |
| 2 | 2 | passive | Other terminal of the non-polarized resettable PPTC; the two end terminations are interchangeable, with a recommended pad of 1.0±0.1 mm wide by 1.50±0.1 mm long and a 1.20±0.1 mm gap. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LUTE |
| Package | 0805 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Hold current (max device current without tripping) | I hold | 2 | A | 25℃ still air | 2 | ||
| Trip current (min current at which device trips) | I trip | 4 | A | 25℃ still air | 2 | ||
| Maximum voltage rating | V max | 6 | Vdc | at rated current (I max) | 2 | ||
| Maximum fault current rating | I max | 50 | A | at rated voltage (V max) | 2 | ||
| Typical power dissipated in tripped state | P d | 1.2 | W | 25℃ still air, tripped state | 2 | ||
| Maximum time to trip | T trip | 5 | s | at 8.00 A | 2 | ||
| Minimum initial resistance (un-soldered) | R min | 0.008 | Ω | initial (un-soldered) state | 2 | ||
| Maximum resistance after trip or reflow | R 1max | 0.05 | Ω | 25℃, measured one hour after tripping or reflow soldering at 260℃ for 20 sec | 2 | ||
| Resistance change, passive aging | -5 | 5 | % | +85°C, 1000 hours (typical) | 4 | ||
| Resistance change, humidity aging | -5 | 5 | % | +85°C, 85% R.H., 168 hours (typical) | 4 | ||
| Resistance change, thermal shock | -33 | 33 | % | +85°C to -40°C, 20 times (typical) | 4 | ||
| Ambient operating temperature | -40 | 85 | ℃ | Ambient operating conditions | 4 | ||
| Maximum surface temperature in tripped state | 125 | ℃ | device in tripped state | 4 | |||
| Ambient-temperature hold current derating, -40℃ | I hold | 2.69 | A | ambient -40℃; table entry 0805L200SLG (same device, G suffix) | 5 | ||
| Ambient-temperature hold current derating, -20℃ | I hold | 2.34 | A | ambient -20℃; table entry 0805L200SLG | 5 | ||
| Ambient-temperature hold current derating, 0℃ | I hold | 2.17 | A | ambient 0℃; table entry 0805L200SLG | 5 | ||
| Ambient-temperature hold current derating, 25℃ | I hold | 2 | A | ambient 25℃; table entry 0805L200SLG | 5 | ||
| Ambient-temperature hold current derating, 40℃ | I hold | 1.66 | A | ambient 40℃; table entry 0805L200SLG | 5 | ||
| Ambient-temperature hold current derating, 50℃ | I hold | 1.49 | A | ambient 50℃; table entry 0805L200SLG | 5 | ||
| Ambient-temperature hold current derating, 60℃ | I hold | 1.37 | A | ambient 60℃; table entry 0805L200SLG | 5 | ||
| Ambient-temperature hold current derating, 70℃ | I hold | 1.14 | A | ambient 70℃; table entry 0805L200SLG | 5 | ||
| Ambient-temperature hold current derating, 85℃ | I hold | 0.8 | A | ambient 85℃; table entry 0805L200SLG | 5 |
CAD (KiCad official)
- Symbol:
0805L200SL6ARG - Footprint:
Fuse:Fuse_0805_2012Metric - 3D model: 0805 (KiCad packages3D, STEP)
- 3D model files:
0805l200sl6arg-etched.step/0805l200sl6arg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);0805l200sl6arg.step/0805l200sl6arg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LUTE datasheet (9 pp, sha256
dbfc10868fd31aa6, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 0805L200SL6ARG
**LUTE** · Resettable Fuses · 0805
0805L200SL6ARG from LUTE, in a 0805. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One terminal of the non-polarized resettable PPTC; rated 2.00 A hold, 4.00 A trip, 6.0 Vdc max, 50 A max fault current. |
| 2 | 2 | passive | Other terminal of the non-polarized resettable PPTC; the two end terminations are interchangeable, with a recommended pad of 1.0±0.1 mm wide by 1.50±0.1 mm long and a 1.20±0.1 mm gap. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LUTE |
| Package | 0805 |
| Category | Circuit Protection |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Hold current (max device current without tripping) | I hold | | | 2 | A | 25℃ still air | 2 |
| Trip current (min current at which device trips) | I trip | 4 | | | A | 25℃ still air | 2 |
| Maximum voltage rating | V max | | | 6 | Vdc | at rated current (I max) | 2 |
| Maximum fault current rating | I max | | | 50 | A | at rated voltage (V max) | 2 |
| Typical power dissipated in tripped state | P d | | 1.2 | | W | 25℃ still air, tripped state | 2 |
| Maximum time to trip | T trip | | | 5 | s | at 8.00 A | 2 |
| Minimum initial resistance (un-soldered) | R min | 0.008 | | | Ω | initial (un-soldered) state | 2 |
| Maximum resistance after trip or reflow | R 1max | | | 0.05 | Ω | 25℃, measured one hour after tripping or reflow soldering at 260℃ for 20 sec | 2 |
| Resistance change, passive aging | | -5 | | 5 | % | +85°C, 1000 hours (typical) | 4 |
| Resistance change, humidity aging | | -5 | | 5 | % | +85°C, 85% R.H., 168 hours (typical) | 4 |
| Resistance change, thermal shock | | -33 | | 33 | % | +85°C to -40°C, 20 times (typical) | 4 |
| Ambient operating temperature | | -40 | | 85 | ℃ | Ambient operating conditions | 4 |
| Maximum surface temperature in tripped state | | | | 125 | ℃ | device in tripped state | 4 |
| Ambient-temperature hold current derating, -40℃ | I hold | | 2.69 | | A | ambient -40℃; table entry 0805L200SLG (same device, G suffix) | 5 |
| Ambient-temperature hold current derating, -20℃ | I hold | | 2.34 | | A | ambient -20℃; table entry 0805L200SLG | 5 |
| Ambient-temperature hold current derating, 0℃ | I hold | | 2.17 | | A | ambient 0℃; table entry 0805L200SLG | 5 |
| Ambient-temperature hold current derating, 25℃ | I hold | | 2 | | A | ambient 25℃; table entry 0805L200SLG | 5 |
| Ambient-temperature hold current derating, 40℃ | I hold | | 1.66 | | A | ambient 40℃; table entry 0805L200SLG | 5 |
| Ambient-temperature hold current derating, 50℃ | I hold | | 1.49 | | A | ambient 50℃; table entry 0805L200SLG | 5 |
| Ambient-temperature hold current derating, 60℃ | I hold | | 1.37 | | A | ambient 60℃; table entry 0805L200SLG | 5 |
| Ambient-temperature hold current derating, 70℃ | I hold | | 1.14 | | A | ambient 70℃; table entry 0805L200SLG | 5 |
| Ambient-temperature hold current derating, 85℃ | I hold | | 0.8 | | A | ambient 85℃; table entry 0805L200SLG | 5 |
## CAD (KiCad official)
- Symbol: `0805L200SL6ARG`
- Footprint: `Fuse:Fuse_0805_2012Metric`
- 3D model: 0805 (KiCad packages3D, STEP)
- 3D model files: `0805l200sl6arg-etched.step` / `0805l200sl6arg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `0805l200sl6arg.step` / `0805l200sl6arg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LUTE datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603346444241674240) (9 pp, sha256 `dbfc10868fd31aa6`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/0805l200sl6arg-datasheet.pdf)