0705530001

{
 "schema": "adom/verification@1",
 "part": "0705530001",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Automated build checks (awaiting human validation)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)",
     "result": "pass"
    },
    {
     "text": "3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)",
     "result": "pass"
    },
    {
     "text": "adom-lbr generate + lint passed",
     "result": "pass"
    },
    {
     "text": "2 of 2 pins described",
     "result": "pass"
    },
    {
     "text": "Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "datasheet",
     "href": "docs/0705530001-datasheet.pdf"
    }
   ],
   "files": {
    "0705530001.kicad_sym": "fb8cbea0bc76a720588a634be44c09477b7d39b62140eb822ef6f47dd76d7362",
    "0705530001.kicad_mod": "1646eef50f368d40bf89bd7b7fec60a7de42e5142c1337b604aaa38a228e7b38",
    "0705530001.step": "ea4d0799007ebdd3945072bf255d673d2fe87eb05fda85fd8d7993ad9397da41"
   }
  },
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Board uses a generic KiCad pin-header/socket footprint and model, not the Molex part-speci...",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Board uses a generic KiCad pin-header/socket footprint and model, not the Molex part-specific land pattern. Footprint and 3D need checking against the Molex sales drawing.",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-28",
   "by": {
    "name": "Claude, at Caleb Taylor's request",
    "handle": "claude"
   },
   "status": "verified",
   "title": "Validated against Molex SDA-70553-XXXX rev M; footprint rebuilt to the drawing, 3D is Molex's own STEP posed",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Datasheet: SDA-70553-XXXX rev M (EC 617172), released 2019-05-14, 3 sheets; the page copy is byte-identical to a fresh molex.com download (2026-10-27, sha256 73aaf184...).",
     "result": "pass"
    },
    {
     "text": "BOM: J8 on NTX_CCX-MIO_Carrier_v1.1; J1 on Teazzers_Taprite_MX-3140N_Carrier; J2 on Teazzers_Taprite_MX-3140N_Carrier; J3 on Teazzers_Taprite_MX-3140N_Carrier; J4 on Teazzers_Taprite_MX-3140N_Carrier; J5 on Teazzers_Taprite_MX-3140N_Carrier carry the Molex part number of this page (BOM, schematic and board value): the page is the intended part. DigiKey and Molex list it as through hole, right angle.",
     "result": "pass"
    },
    {
     "text": "Footprint rebuilt from SDA-70553-XXXX rev M sheet 1 RECOMMENDED PC BOARD LAYOUT: 2 holes 1.09 (1.09 +-0.08) at 2.54 (+-0.08 non-accum.), pads 1.74 (KiCad SL 171971 convention for the same 0.64 pin), pad 1 roundrect at the origin, positions along +Y; overlay on the layout coincides (provenance/evidence/overlay_sheet1_pcb_layout.png).",
     "result": "pass"
    },
    {
     "text": "Body outline and courtyard from the drawing: mating face 12.89 from the pad row (13.21 to the tail rear edge - 0.32), overall depth 13.59, width B + 2 x 1.02 = 7.37 (cavity B = 5.33), latch 6.99 high; courtyard 0.5 mm round body and pads; silk clipped 0.2 mm clear of the pads; pad 1 silk triangle.",
     "result": "pass"
    },
    {
     "text": "Contact numbering: SDA-70553 does not number the contacts and the header is symmetric about its centre; contact 1 = pad 1 = the board footprint pad 1 (unchanged).",
     "result": "note"
    },
    {
     "text": "3D: Molex's own STEP 705530001.stp for 70553-0001 (STEP AP203 (CONFIG_CONTROL_DESIGN), Pro/ENGINEER export 2013-07-31, one fused solid, no colour), from the 3D CAD model link on the Molex product page (https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/3dcadmodels/705/70553/705530001_stp.zip, retrieved 2026-10-27; zip sha256 527f26661697, STEP sha256 ff4d96c76047); original bytes kept as vendor/0705530001-molex-original.step.",
     "result": "pass"
    },
    {
     "text": "Posed by rotation and translation only (provenance/tools/pose_vendor.py): new X, Y, Z = Molex axes [[0, 0, 1], [1, 0, 0], [0, 1, 0]], then translate [7.1755, -1.27, 2.922] mm; seat (lowest housing level, found by bisection) on z = 0, mating face toward +X; all 2 tails land on their drilled pads (max offset 0.000 mm); footprint binding identity.",
     "result": "pass"
    },
    {
     "text": "Molex model against SDA-70553-XXXX rev M (provenance/tools/measure_vendor.py, provenance/drawing_check.json): overall depth (13.59) REF 13.589 (drawing 13.59); overall height (6.99) REF 6.986 (drawing 6.99); width B + 2 x (1.02) 7.366 (drawing 7.37); tail below seat D (3.30) REF 3.301 (drawing 3.3); mating face to tail rear edge (13.21) TYP 13.21 (drawing 13.21); cavity height 4.32 (2 ckt, under latch) 4.318 (drawing 4.32); cavity height 2.79 (2 ckt, behind latch) 2.667 (drawing 2.79); E: pin tip to cavity rear wall 6.10 +-0.25 6.096 (drawing 6.1); cavity rear wall from mating face (8.89) 8.889 (drawing 8.89); pin square (0.64) 0.635 (drawing 0.64): all within the drawing tolerances.",
     "result": "pass"
    },
    {
     "text": "The posed Molex model, overlaid on the drawing views at the drawing scale, coincides with the outline, pins and tails (provenance/evidence/overlay_sheet1_side_view.png, provenance/evidence/overlay_sheet1_pcb_layout.png).",
     "result": "pass"
    },
    {
     "text": "Undimensioned detail: the latch block on top is 2.79 mm deep in the Molex model against about 3.8 mm drawn on the 4:1 side view; every printed dimension agrees.",
     "result": "note"
    },
    {
     "text": "Colour: none in the Molex file (AP203, one fused solid); nothing to keep, GLB uncoloured.",
     "result": "note"
    },
    {
     "text": "MPN etch: adom-chip-laser 0.2.0 on the housing top (0.857 mm font, separate Adom.LaserEtch part).",
     "result": "pass"
    },
    {
     "text": "step_pose.py: plain and etched STEP PASS (Z-up, seat on z = 0, tails below, identity binding; body off the pad-pattern centre by design, right-angle overhang, courtyard centred on the body).",
     "result": "pass"
    },
    {
     "text": "Symbol Footprint property changed from Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical to 0705530001:0705530001 (the page footprint).",
     "result": "note"
    },
    {
     "text": "Distributors: DigiKey WM4900-ND (Molex 0705530001, CONN HEADER R/A, confirmed by search 2026-10-27); Mouser lists the part with Mouser No. N/A (not sold) -> false with a note.",
     "result": "pass"
    },
    {
     "text": "Boards affected: NTX_CCX-MIO_Carrier_v1.1 J8; Teazzers_Taprite_MX-3140N_Carrier J1; Teazzers_Taprite_MX-3140N_Carrier J2; Teazzers_Taprite_MX-3140N_Carrier J3; Teazzers_Taprite_MX-3140N_Carrier J4; Teazzers_Taprite_MX-3140N_Carrier J5 use the generic vertical KiCad footprint; see the result file for the per-reference differences. The boards are Caleb's to change.",
     "result": "note"
    },
    {
     "text": "Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "component-page-verify: all checks pass",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "Molex sales drawing SDA-70553-XXXX (SL right-angle header with latch) (SDA-70553-XXXX rev M (EC 617172))",
     "href": "https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/705/70553/705530001_sd.pdf"
    },
    {
     "label": "Molex product page 70553-0001 (source of the 3D model)",
     "href": "https://www.molex.com/en-us/products/part-detail/705530001"
    }
   ],
   "files": {
    "0705530001.kicad_sym": "fcca3bc4602a42291504d0015149ac9600631fe279d706a74f033028321df6c3",
    "0705530001.kicad_mod": "eae94a49cf3cf585d96c78b33c59a267e562919b9bf355fa202cfdedaa569a1d",
    "0705530001.step": "83c9cf4eb81697123183f1eac8e74bcfc3d3398ceaeaf7029509056a65f10f3e"
   }
  }
 ]
}