3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown0683G9150-01
Bel Fuse Inc. · Circuit Protection · 2-SMD, Square End Block
0683G9150-01 from Bel Fuse Inc., in a 2-SMD, Square End Block. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Fuse end cap terminal on one side of the ceramic body, rated 15A with 0.0035 ohm typical cold resistance and 0.10 V max drop at 100% In. |
| 2 | 2 | passive | Fuse end cap terminal on the opposite side of the ceramic body, interchangeable with the other terminal, with ratings of 350VAC and 125VDC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Bel Fuse Inc. |
| Package | 2-SMD, Square End Block |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ampere Rating | In | 15 | A | 2 | |||
| Typical Cold Resistance | 0.0035 | ohms | 2 | ||||
| Volt-drop @100%In | 0.1 | V | @100%In, max. | 2 | |||
| Maximum Power Dissipation | 1.5 | W | 2 | ||||
| Nominal Melting I²T | I²T | 270 | A² Sec | @10 In | 2 | ||
| Blow time at 100% testing current | 4 | hr | 100% testing current, minimum 4 hr | 1 | |||
| Blow time at 210% testing current | 120 | sec | 210% testing current | 1 | |||
| Blow time at 1000% testing current | 0.01 | 0.1 | sec | 1000% testing current | 1 | ||
| Rated AC voltage | 350 | VAC | 1.6A-30A, 350VAC | 1 | |||
| Rated DC voltage | 125 | VDC | 1.6A-30A, 125VDC | 1 | |||
| Operating Temperature | -55 | 125 | °C | 3 | |||
| Insulation Resistance | 10000 | ohms | MIL-STD-202G, Method 302, Test Condition B (After Opening) | 3 | |||
| Interrupting rating DC | 2000 | A | 1.6A-30A/125V DC | 1 | |||
| Interrupting rating AC | 500 | A | >5A-30A/250V AC | 1 | |||
| Interrupting rating AC | 100 | A | 1.6A-30A/350V AC | 1 | |||
| Peak reflow temperature | Tp | 260 | °C | IR reflow, J-STD-020D | 3 |
CAD (Adom-generated)
- Symbol:
0683G9150-01 - Footprint:
Adom_Gen:Bel_Fuse_Inc._0683_500b65 - 3D model: generated to fit the land (STEP)
- 3D model files:
0683g9150-01-etched.step/0683g9150-01-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);0683g9150-01.step/0683g9150-01.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Bel Fuse Inc. datasheet (4 pp, sha256
3bf87a0326c03755, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.