0402ZD105KAT2A - KYOCERA AVX

{
 "schema": "adom/verification@1",
 "part": "0402ZD105KAT2A",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "3D model matches the datasheet package dimensions",
   "scope": [
    "3d-model"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "L: model 1.000 mm, datasheet 0.80 to 1.20 mm",
     "result": "pass"
    },
    {
     "text": "W: model 0.500 mm, datasheet 0.30 to 0.70 mm",
     "result": "pass"
    },
    {
     "text": "T/H: model 0.500 mm, datasheet 0.00 to 0.56 mm",
     "result": "pass"
    },
    {
     "text": "t (terminal), top: model 0.200 mm, datasheet 0.15 to 0.35 mm",
     "result": "pass"
    },
    {
     "text": "t (terminal), bottom: model 0.200 mm, datasheet 0.15 to 0.35 mm",
     "result": "pass"
    },
    {
     "text": "Z-up, seated on z = 0, centred on the footprint origin, long axis on X",
     "result": "pass"
    },
    {
     "text": "no manufacturer STEP was reachable for this exact part number; the model is KiCad's library package, checked against the datasheet table",
     "result": "note"
    },
    {
     "text": "the sheet prints thickness as a maximum only (letter C, 0.56 mm); the check range is 0 to 0.56 mm",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "overlay (top, bottom, side, end at true scale)",
     "href": "docs/verify/0402zd105kat2a-overlay.png"
    },
    {
     "label": "numbers",
     "href": "docs/verify/0402zd105kat2a-check.json"
    },
    {
     "label": "datasheet (KYOCERA AVX X5R Dielectric General Specifications, TDS-SMDMLCC-0014 Rev 4 (catalog pages 36 to 39))",
     "href": "docs/0402zd105kat2a-datasheet.pdf"
    }
   ],
   "files": {
    "0402ZD105KAT2A.step": "03e44c4b2b727b8d4b6b1fd598cbd12dd5e614f1dfeefa96a92a07e3a3b312a2",
    "package-reference.glb": "100935c5c0d6f20a6c9bdfb6386f874dc8a4457bf0e4f3ace69f1ab090100773",
    "docs/0402zd105kat2a-datasheet.pdf": "6c10851c76caad7a79a27173530c43e7594e101ac64f6b9e42dfb805fc42225d"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "open",
   "title": "Footprint compared with the maker's recommended land pattern (KiCad pads larger than the maker's range)",
   "scope": [
    "footprint"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "gap between lands: KiCad 0.40 mm, maker 0.40 to 0.60 mm",
     "result": "pass"
    },
    {
     "text": "land length: KiCad 0.56 mm, maker 0.40 to 0.50 mm",
     "result": "note"
    },
    {
     "text": "land width: KiCad 0.62 mm, maker 0.50 to 0.75 mm",
     "result": "pass"
    },
    {
     "text": "overall length (a + 2b, derived): KiCad 1.52 mm, maker 1.20 to 1.60 mm",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "comparison drawing",
     "href": "land-pattern/land-pattern.png"
    },
    {
     "label": "numbers",
     "href": "land-pattern/land-check.json"
    },
    {
     "label": "write-up",
     "href": "land-pattern/README.md"
    }
   ],
   "files": {
    "C_0402_1005Metric_0402ZD105KAT2A.kicad_mod": "75e472f604e9e3473daf00ae179e4902d07ae5dc5eddbc841028a68b91c022c0"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Marking: the model shows the real part, which is unmarked",
   "scope": [
    "3d-model",
    "marking"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "The KYOCERA AVX X5R sheets (legacy Rev 4 and KGM Rev 9) specify no part marking: neither has a marking section and both show plain bodies (cx5r.pdf (4 pages) and cx5r-KGM.pdf (4 pages), all pages searched)",
     "result": "pass"
    },
    {
     "text": "no AI-added part-number etch on any model",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "datasheet",
     "href": "docs/0402zd105kat2a-datasheet.pdf"
    }
   ],
   "files": {
    "0402ZD105KAT2A.step": "03e44c4b2b727b8d4b6b1fd598cbd12dd5e614f1dfeefa96a92a07e3a3b312a2"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Board-use LOD GLBs are clean and share the STEP pose",
   "scope": [
    "lod"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "four levels written, read back, bounds equal the STEP (Z-up, metres, seat z = 0)",
     "result": "pass"
    },
    {
     "text": "no footprint, pad outline, label or silkscreen helpers; terminals present at every level",
     "result": "pass"
    },
    {
     "text": "previews looked at by the AI agent, not yet by a person",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "manifest",
     "href": "lod/manifest.json"
    }
   ],
   "files": {
    "lod/high.glb": "27cda00dee86721ad6419a506490fa503c04a9965fd1ea6e2e0d1a94f239fb31",
    "lod/medium.glb": "5e706ccb70132f1c1236fa0fb490c0d4d05fdfc5d8e9dec4dfba0d25e2fba3ca",
    "lod/low.glb": "95e6b2a0ea55463cd108433030e3a674de11844a759101d21306d2ff897a56c7",
    "lod/super-low.glb": "64467d9cf82cfd195c00947b93fbff37d2f859164cf71abd7ea02a5348523904"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Pin 1 and polarity",
   "scope": [
    "footprint",
    "3d-model",
    "symbol"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "non-polar two-terminal capacitor: pads 1 and 2 are interchangeable; symbol pins 1 and 2 map to pads 1 and 2",
     "result": "pass"
    },
    {
     "text": "model terminals sit on the footprint pads (both centred on the origin, long axis on X)",
     "result": "pass"
    }
   ],
   "evidence": [],
   "files": {
    "C_0402_1005Metric_0402ZD105KAT2A.kicad_mod": "75e472f604e9e3473daf00ae179e4902d07ae5dc5eddbc841028a68b91c022c0",
    "0402ZD105KAT2A.kicad_sym": "4fb61235b89779e8ebb17e67d638bad7e576ef1aa18546042e4b9d84b3a32015",
    "0402ZD105KAT2A.step": "03e44c4b2b727b8d4b6b1fd598cbd12dd5e614f1dfeefa96a92a07e3a3b312a2"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Hero GLB built to adom-hero 1.4 over the clean model",
   "scope": [
    "3d-model",
    "hero"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "pads 2, silk items 2, pin1 none, labels 2; align OK (offset 0.0 mm)",
     "result": "pass"
    },
    {
     "text": "pad outlines teal 50 %, silkscreen 30 % alpha, pad-number labels 50 % (the terminals have no names); no pin-1 dot, the part is non-polar",
     "result": "pass"
    },
    {
     "text": "hero is a separate file; package-reference.glb and every LOD carry no artwork",
     "result": "pass"
    },
    {
     "text": "preview looked at by the AI agent; the live wiki viewer still needs a person's look",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "preview (top and oblique)",
     "href": "docs/0402zd105kat2a-hero-preview.png"
    },
    {
     "label": "sidecar",
     "href": "0402zd105kat2a-hero.overlay.json"
    }
   ],
   "files": {
    "0402zd105kat2a-hero.glb": "4201e860514b498278ab8df9f9f5f2e57d09281815a135bdd1f028acaa6dbc62",
    "package-reference.glb": "100935c5c0d6f20a6c9bdfb6386f874dc8a4457bf0e4f3ace69f1ab090100773",
    "C_0402_1005Metric_0402ZD105KAT2A.kicad_mod": "75e472f604e9e3473daf00ae179e4902d07ae5dc5eddbc841028a68b91c022c0"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Altium libraries generated from the KiCad symbol and footprint",
   "scope": [
    "symbol",
    "footprint",
    "eda"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "adom-lbr import-kicad + export-altium: native .SchLib (2 pins) and .PcbLib (2 pads) written and read back; MPN, Manufacturer and supplier numbers carried as parameters",
     "result": "pass"
    },
    {
     "text": "not yet opened in Altium by a person",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {
    "altium/0402ZD105KAT2A.SchLib": "72469850a0eeeac6830560ec7ed39edfd72c1bbee5ef63d90855a423f906abdd",
    "altium/0402ZD105KAT2A.PcbLib": "6e364773b4ebbe1cd1c05e8c89beb73f4f517e4f02b15bc96d36ee8f72e9ce83",
    "altium/0402ZD105KAT2A.adom-lbr.json": "67b1d3a02532f202d28b20c21231aeac442e120b3fbe38295a950d66ea5900e9"
   }
  }
 ]
}