3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdown0215001.MXP
Littelfuse · Disposable Fuses · D5.2xL20mm
0215001.MXP from Littelfuse, in a D5.2xL20mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Fuse end cap (non-polar; Littelfuse prints no terminal names) |
| 2 | 2 | passive | Fuse end cap (non-polar; Littelfuse prints no terminal names) |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Littelfuse |
| Package | D5.2xL20mm |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Opening time at 150% of rating | 60 | minutes | 150% of ampere rating, 1A-3.15A | 1 | |||
| Opening time at 210% of rating | 30 | minutes | 210% of ampere rating, 1A-3.15A | 1 | |||
| Opening time at 275% of rating | 0.75 | 80 | sec | 275% of ampere rating, 1A-3.15A | 1 | ||
| Opening time at 400% of rating | 0.095 | 5 | sec | 400% of ampere rating, 1A-3.15A | 1 | ||
| Opening time at 1000% of rating | 0.01 | 0.15 | sec | 1000% of ampere rating, 1A-3.15A | 1 | ||
| Maximum voltage drop at rated current | 350 | mV | At rated current | 2 | |||
| Maximum power dissipation | 2.5 | W | At 1.5In | 2 | |||
| Operating temperature | -55 | 125 | °C | 2 | |||
| Voltage rating | 250 | V | 2 | ||||
| Ampere rating | 1 | A | Amp code 001. | 2 | |||
| Nominal cold resistance | 0.1515 | Ohms | 2 | ||||
| Nominal melting I2t | 1.52 | A2 sec | I2t test at 10x rated current | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | tin | Leads: Tin-plated Copper | 2 |
CAD (Adom-generated)
- Symbol:
0215001.MXP - Footprint:
Adom_Gen:Littelfuse_0215001_b7a239 - 3D model: generated to fit the land (STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Littelfuse datasheet (4 pp, sha256
6ea4fed8f791e769, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: LAND CHOICE (task master 2026-11-17): 0215001.MXP is a 5 x 20 mm cartridge fuse with no leads; the land is a pair of Littelfuse 111 PCB fuse clips (111 501, ordering PN 01110501Z). Littelfuse 111 Series datasheet (rev. GD 01/31/23) 'Recommended Mounting Dimensions' for 111 501/111 506: two holes per clip 5.0 +.076/-.025 apart across the fuse axis, hole dia 1.17 (.046 in); clip-to-clip 'B' = .74 in for 5x20 (Table 1) = 18.8 mm along the fuse axis. Pad copper is not printed: 2.2 mm round pads (derived, 0.5 mm annular ring on the 1.17 drill). KiCad Fuseholder_Clip-5x20mm_Littelfuse_111_Inline_P20.00x5.00mm puts each clip's two holes along the fuse axis (pads at 0/5 and 15/20), which does not match this drawing, so the land is explicit. Body = the cartridge only (fuse sheet: 20 +/-0.5 long, 5.2 dia); height 6.86 = Table 1 'A' .27 in, the fuse top with the fuse in place. Page note: cartridge fuse, no leads; land is a pair of Littelfuse 111 PCB clips; use a holder instead if preferred.