component
0.5K-HX-8PWB
Public Made by Adomby adom
HDGC FFC, FPC (Flat Flexible) Connector Assemblies, SMD,P=0.5mm. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
main
Ray
0-5k-hx-8pwb: CAD wording names the Adom_Gen land, not KiCad official
28ca0f1
0.5K-HX-8PWB
HDGC · FFC, FPC (Flat Flexible) Connector Assemblies · SMD, P=0.5mm
0.5K-HX-8PWB from HDGC, in a SMD, P=0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Review notes
- Pin numbering. The HDGC datasheet marks no pin 1 and prints no contact numbers. The contacts are numbered 1 to 8, left to right, as the page 2 land pattern is drawn, with the contacts above and the mounting pads below. Reviewed by Ray.
- Footprint source. The footprint comes from the page 2 'Recommended PCB mounting pattern', 8-contact row of the table:
- Signal pads: 0.30 x 0.80 at 0.50 pitch.
- Mounting pads (MP): 0.40 x 0.80 at +/-2.75.
- Overall: 3.30 from the signal-pad top to the mounting-pad bottom.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 2 | 2 | passive | Contact 2. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 3 | 3 | passive | Contact 3. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 4 | 4 | passive | Contact 4. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 5 | 5 | passive | Contact 5. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 6 | 6 | passive | Contact 6. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 7 | 7 | passive | Contact 7. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 8 | 8 | passive | Contact 8. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HDGC |
| Package | SMD, P=0.5mm |
| Category | Connectors |
| Pins | 8 |
CAD (Adom-generated)
- Symbol:
0.5K-HX-8PWB - Footprint:
Adom_Gen:HDGC_0_8c7f03 - 3D model: generated to fit the land (STEP)
- 3D model files:
0-5k-hx-8pwb-etched.step/0-5k-hx-8pwb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);0-5k-hx-8pwb.step/0-5k-hx-8pwb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HDGC datasheet (2 pp, sha256
e7fdbd8376a79be5, retrieved 2026-11-09, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
# 0.5K-HX-8PWB
**HDGC** · FFC, FPC (Flat Flexible) Connector Assemblies · SMD, P=0.5mm
0.5K-HX-8PWB from HDGC, in a SMD, P=0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
## Review notes
- **Pin numbering.** The HDGC datasheet marks no pin 1 and prints no contact numbers. The contacts are numbered 1 to 8, left to right, as the page 2 land pattern is drawn, with the contacts above and the mounting pads below. Reviewed by Ray.
- **Footprint source.** The footprint comes from the page 2 'Recommended PCB mounting pattern', 8-contact row of the table:
- Signal pads: 0.30 x 0.80 at 0.50 pitch.
- Mounting pads (MP): 0.40 x 0.80 at +/-2.75.
- Overall: 3.30 from the signal-pad top to the mounting-pad bottom.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 2 | 2 | passive | Contact 2. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 3 | 3 | passive | Contact 3. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 4 | 4 | passive | Contact 4. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 5 | 5 | passive | Contact 5. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 6 | 6 | passive | Contact 6. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 7 | 7 | passive | Contact 7. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
| 8 | 8 | passive | Contact 8. The HDGC drawing marks no pin 1; contacts are numbered left to right as the page 2 land pattern is drawn (Ray, review #2669). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HDGC |
| Package | SMD, P=0.5mm |
| Category | Connectors |
| Pins | 8 |
## CAD (Adom-generated)
- Symbol: `0.5K-HX-8PWB`
- Footprint: `Adom_Gen:HDGC_0_8c7f03`
- 3D model: generated to fit the land (STEP)
- 3D model files: `0-5k-hx-8pwb-etched.step` / `0-5k-hx-8pwb-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `0-5k-hx-8pwb.step` / `0-5k-hx-8pwb.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HDGC datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757322200141434880) (2 pp, sha256 `e7fdbd8376a79be5`, retrieved 2026-11-09, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
[Datasheet PDF](docs/0-5k-hx-8pwb-datasheet.pdf)