ZTP7193KT from ZILLTEK, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	GND	power_in	Device ground return. Connect to a large copper ground pour for thermal dissipation (θJA = 100°C/W) and low-impedance return of the switching currents.
2	SW	output	Power switching node - output of the internal high-side and low-side N-channel MOSFETs. Connect to the external inductor of the LC output filter. A capacitor from SW to BOOT powers the high-side gate driver. Rated −0.3V to VIN+0.3V (−5V to 21V for <10ns transients).
3	IN	power_in	Power input supply for the IC and the step-down converter switches. Operating range 4.5V to 18V (absolute max 19V; 21V for <10ns). Bypass to GND with a low-ESR ceramic capacitor placed as close to the pin as possible.
4	FB	input	Feedback input to the internal error amplifier. Drive with a resistive divider from VOUT; regulation threshold is 0.765V (typ). Over-voltage comparator trips at 0.96V (≈20% above nominal), turning the high-side switch off.
5	EN	input	Enable digital input. Drive high (rising threshold 1.22V typ) to enable the regulator, low (falling threshold 1.12V typ) to shut it down (IQ ≈ 3µA). Pull up with a 100kΩ resistor to IN for automatic startup. Absolute max 6V.
6	BOOT	passive	High-side gate-drive bootstrap input. Connect a 0.1µF (or greater) capacitor from SW to BOOT to develop the gate-drive supply for the internal high-side N-channel MOSFET. Charged from the internal 5V rail when SW is low. Rated VSW−0.3V to VSW+6V.

Key specifications

Parameter	Value
Manufacturer	ZILLTEK
Package	TSOT-23-6L
Category	PMIC
Pins	6

Ordering variants

Same part, different packaging or reel option.

ZTP7193KT

CAD (KiCad official)

Symbol: ZTP7193KT
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: TSOT-23-6L (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`ztp7193kt.step`	97 KB	You want the bare part, or you mark your own boards.
`ztp7193kt-etched.step`	1.5 MB	You want the part with `ZTP7193KT` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 383 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: ZILLTEK datasheet (10 pp, sha256 7dde7dcff3f2ec2c, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF