component
XL1410E1
Public Made by Adomby adom
XLSEMI DC-DC Converters, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownXL1410E1
XLSEMI · DC-DC Converters · SOIC-8
XL1410E1 from XLSEMI, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No Connect. Not internally bonded; leave floating or tie to a nearby copper island for mechanical stability. |
| 2 | VIN | power_in | Supply Voltage Input Pin. Operates from 3.6V to 28V DC. Bypass VIN to GND with a suitably large capacitor (e.g. 220uF/35V) to eliminate input noise. Absolute max Vin = 32V. |
| 3 | SW | power_out | Power Switch Output Pin (SW). Internal high-side MOSFET switch node that drives the external inductor and Schottky catch diode. Absolute max Vsw range is -0.3V to Vin. |
| 4 | GND | power_in | Ground Pin. Care must be taken in layout: this pin should be placed outside of the Schottky diode to output-capacitor ground path to prevent switching-current spikes from inducing voltage noise into the XL1410. |
| 5 | FB | input | Feedback Pin (FB). Through an external resistor divider network, FB senses the output voltage and regulates it. Feedback threshold voltage is 1.222V (typ), giving VOUT = 1.222 x (1 + R2/R1). |
| 6 | NC | unconnected | No Connect. Not internally bonded; leave floating. |
| 7 | EN | input | Enable Pin. Drive EN low to turn off the device, drive high to turn it on. Floating defaults high. Threshold ~1.4V (High/ON), 0.8V (Low/OFF); absolute max -0.3V to Vin. |
| 8 | NC | unconnected | No Connect. Not internally bonded; leave floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
XL1410E1
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 1.186 | 1.222 | 1.258 | V | Vin = 7V to 28V, Vout=5V, Iload=0.2A to 2A | 6 |
| Input operation voltage | Vin | 3.6 | 28 | V | 6 | ||
| Shutdown Supply Current | IS | 60 | 200 | uA | VEN=0V | 6 | |
| Quiescent Supply Current | Iq | 3 | 5 | mA | VEN =2V, VFB =Vin | 6 | |
| Oscillator Frequency | Fosc | 323 | 380 | 437 | Khz | 6 | |
| EN Pin Threshold High (Regulator ON) | VEN | 1.4 | V | High (Regulator ON) | 6 | ||
| EN Pin Threshold Low (Regulator OFF) | VEN | 0.8 | V | Low (Regulator OFF) | 6 | ||
| EN Pin Input Leakage Current (ON) | IH | 1 | 15 | uA | VEN =2V (ON) | 6 | |
| EN Pin Input Leakage Current (OFF) | IL | 1 | 15 | uA | VEN =0V (OFF) | 6 | |
| Input Voltage | Vin | -0.3 | 32 | V | 5 | ||
| Feedback Pin Voltage | VFB | -0.3 | V | Upper limit printed as Vin | 5 | ||
| EN Pin Voltage | VEN | -0.3 | V | Upper limit printed as Vin | 5 | ||
| Output Switch Pin Voltage | VSW | -0.3 | V | Upper limit printed as Vin | 5 | ||
| Operating Junction Temperature | TJ | -40 | 125 | ℃ | 5 | ||
| Storage Temperature | TSTG | -65 | 150 | ℃ | 5 | ||
| Lead Temperature (Soldering, 10 sec) | TLEAD | 260 | ℃ | Soldering, 10 sec | 5 | ||
| ESD (HBM) | 2000 | V | HBM | 5 | |||
| Thermal Resistance (Junction to Ambient, No Heatsink, Free Air) | RJA | 100 | ℃/W | SOP8, junction to ambient, no heatsink, free air | 5 |
CAD (KiCad official)
- Symbol:
XL1410E1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
xl1410e1-etched.step/xl1410e1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl1410e1.step/xl1410e1.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
xl1410e1.step |
122 KB | You want the bare part, or you mark your own boards. |
xl1410e1-etched.step |
1.3 MB | You want the part with XL1410E1 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 362 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (11 pp, sha256
5e1cee95ddf162c0, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).