component

XC6215B332MR

Public Unreviewed

by Ray

TECH PUBLIC Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpmicxc6215b332mr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

XC6215B332MR

TECH PUBLIC · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

XC6215B332MR from TECH PUBLIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Supply voltage input, 1.2V to 5.5V operating range (absolute max 6.5V). Recommend a 1-10uF ceramic or tantalum bypass capacitor from VIN to GND.
2 GND power_in Device ground reference. Typical ground current is 2uA at no load; shutdown ground current is 0.1uA typ.
3 CE input Chip enable (active-high). VIH >= 1.0V enables the regulator; VIL <= 0.4V shuts it down. Input current typ 10nA (max 100nA at VEN=5V). Do not leave floating.
4 NC unconnected No internal connection. Leave floating or tie to GND.
5 OUT power_out Regulated 3.3V output, up to 300mA. Requires a 1-10uF ceramic or tantalum output capacitor to GND for stability. Includes current-limit (300-500mA), over-temperature protection (Tsd=155C), and output discharge (100 ohm) when disabled.

Key specifications

Parameter Value
Manufacturer TECH PUBLIC
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • XC6215B332MR

CAD (KiCad official)

  • Symbol: XC6215B332MR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
xc6215b332mr.step 85 KB You want the bare part, or you mark your own boards.
xc6215b332mr-etched.step 2.6 MB You want the part with XC6215B332MR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 610 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TECH PUBLIC datasheet (8 pp, sha256 fac58515306d9458, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF