XC6206P332PR-G from Torex Semicon, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VSS	power_in	Ground reference for the regulator. Connect to system ground; strengthen VSS wiring where wiring impedance may be high.
2	VIN	power_in	Unregulated input supply, 1.8V to 6.0V operating (absolute max -0.3 to +7.0V). Bypass with a 1µF ceramic capacitor placed close to the pin.
3	VOUT	power_out	Regulated 3.3V output (±2% @ IOUT=30mA, VOUT(T)≥1.5V). Delivers up to ~200mA with built-in current limit (~200mA foldback for the 3.3V option, ISHORT typ 100mA). Requires a 1µF ceramic load capacitor for stability; low-ESR ceramics ≥1µF are supported.

Key specifications

Parameter	Value
Manufacturer	Torex Semicon
Package	SOT-89-3
Category	PMIC
Pins	3

Ordering variants

Same part, different packaging or reel option.

XC6206P332PR-G
XC6206P332PR-GMR-G
XC6206P332PR-GDR-G

CAD (KiCad official)

Symbol: XC6206P332PR-G
Footprint: Package_TO_SOT_SMD:SOT-89-3
3D model: SOT-89-3 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`xc6206p332pr-g.step`	57 KB	You want the bare part, or you mark your own boards.
`xc6206p332pr-g-etched.step`	2.3 MB	You want the part with `XC6206P332PR-G` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 566 faces against 42 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Torex Semicon datasheet (15 pp, sha256 720c4340f83c6994, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF