W25Q32JWSSIQ TR from Winbond Elec, in a SOIC-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	/CS	input	Chip Select input, active low. Enables and disables device operation; driving high places the device in standby mode.
2	DO (IO1)	bidirectional	Serial Data Output for Standard SPI (single-bit read); doubles as bidirectional IO1 during Dual/Quad SPI operations.
3	/WP (IO2)	bidirectional	Write Protect input (active low) in Standard/Dual SPI; repurposed as bidirectional IO2 data line in Quad SPI mode when Quad Enable (QE) status bit is set.
4	GND	power_in	Ground return for the power supply and I/O signals.
5	DI (IO0)	bidirectional	Serial Data Input for Standard SPI (single-bit command/address/data in); doubles as bidirectional IO0 during Dual/Quad SPI operations.
6	CLK	input	Serial Clock input. Supports up to 133 MHz. All input data is latched on the rising edge and output data is shifted on the falling edge (CPOL/CPHA = 0,0 or 1,1).
7	/HOLD or /RESET (IO3)	bidirectional	Hold or Reset input (active low) in Standard/Dual SPI, selected via status/config register; repurposed as bidirectional IO3 data line in Quad SPI mode when Quad Enable (QE) status bit is set.
8	VCC	power_in	Supply voltage input, 1.7 V to 1.95 V single supply.

Key specifications

Parameter	Value
Manufacturer	Winbond Elec
Package	SOIC-8-208mil
Category	Memory
Pins	8

Ordering variants

Same part, different packaging or reel option.

W25Q32JWSSIQ TR
W25Q32JWSSIQ TRSSIM
W25Q32JWSSIQ TRSNIQ
W25Q32JWSSIQ TRSNIM
W25Q32JWSSIQ TRZPIQ
W25Q32JWSSIQ TRZPIM
W25Q32JWSSIQ TRXGIQ
W25Q32JWSSIQ TRXGIM
W25Q32JWSSIQ TRUUIQ
W25Q32JWSSIQ TRUUIM
W25Q32JWSSIQ TRTBIQ
W25Q32JWSSIQ TRTBIM
W25Q32JWSSIQ TRTCIQ
W25Q32JWSSIQ TRTCIM
W25Q32JWSSIQ TRBYIQ
W25Q32JWSSIQ TRBYIM
W25Q32JWSSIQ TRSTIM

CAD (KiCad official)

Symbol: W25Q32JWSSIQ TR
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8-208mil (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`w25q32jwssiq-tr.step`	122 KB	You want the bare part, or you mark your own boards.
`w25q32jwssiq-tr-etched.step`	3.0 MB	You want the part with `W25Q32JWSSIQ TR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 724 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Winbond Elec datasheet (77 pp, sha256 b2a795b80b77f932, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF