component
TSV6294IPT
Public Unreviewedby Ray
UMW Operational Amplifier, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownTSV6294IPT
UMW · Operational Amplifier · TSSOP-14
TSV6294IPT from UMW, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Op-amp 1 output. Rail-to-rail CMOS output, Isource/Isink ~10-12 mA typ at VCC=1.8 V. |
| 2 | In1- | input | Op-amp 1 inverting input. Rail-to-rail input, 1 pA typ input bias current. |
| 3 | In1+ | input | Op-amp 1 non-inverting input. Rail-to-rail input, common-mode range (VCC-)-0.1 to (VCC+)+0.1 V. |
| 4 | VCC+ | power_in | Positive supply pin. Operating range 1.5 V to 5.5 V; absolute maximum 6 V. |
| 5 | In2+ | input | Op-amp 2 non-inverting input. Rail-to-rail input. |
| 6 | In2- | input | Op-amp 2 inverting input. |
| 7 | Out2 | output | Op-amp 2 output. Rail-to-rail CMOS output. |
| 8 | Out3 | output | Op-amp 3 output. Rail-to-rail CMOS output. |
| 9 | In3- | input | Op-amp 3 inverting input. |
| 10 | In3+ | input | Op-amp 3 non-inverting input. |
| 11 | VCC- | power_in | Negative supply / ground pin. Total supply (VCC+ minus VCC-) must be 1.5-5.5 V. |
| 12 | In4+ | input | Op-amp 4 non-inverting input. |
| 13 | In4- | input | Op-amp 4 inverting input. |
| 14 | Out4 | output | Op-amp 4 output. Rail-to-rail CMOS output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | TSSOP-14 |
| Category | Op-amp/Cmp |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
TSV6294IPT
CAD (KiCad official)
- Symbol:
TSV6294IPT - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
tsv6294ipt.step |
194 KB | You want the bare part, or you mark your own boards. |
tsv6294ipt-etched.step |
2.3 MB | You want the part with TSV6294IPT already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 571 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UMW datasheet (18 pp, sha256
ad544b28321f96ad, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).