TPV358S8
Public Unreviewedby Ray
TECH PUBLIC Operational Amplifier, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownTPV358S8
TECH PUBLIC · Operational Amplifier · SOP-8
TPV358S8 from TECH PUBLIC, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of op-amp channel A. Rail-to-rail-ish output stage sourcing/sinking typical op-amp currents. |
| 2 | INA- | input | Inverting input of op-amp channel A. High-impedance analog input. |
| 3 | INA+ | input | Non-inverting input of op-amp channel A. High-impedance analog input. |
| 4 | VEE/GND | power_in | Negative supply / ground. Connect to 0 V in single-supply operation or to the negative rail in split-supply operation. |
| 5 | INB+ | input | Non-inverting input of op-amp channel B. High-impedance analog input. |
| 6 | INB- | input | Inverting input of op-amp channel B. High-impedance analog input. |
| 7 | OUTB | output | Output of op-amp channel B. |
| 8 | VCC | power_in | Positive supply pin. Typical operating range 3 V to 32 V single-supply (±1.5 V to ±16 V split). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TECH PUBLIC |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
TPV358S8
CAD (KiCad official)
- Symbol:
TPV358S8 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
tpv358s8.step |
122 KB | You want the bare part, or you mark your own boards. |
tpv358s8-etched.step |
2.1 MB | You want the part with TPV358S8 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 508 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TECH PUBLIC datasheet (13 pp, sha256
2c5c62128048c02d, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).