TPRT9013-25GB
Public Unreviewedby Ray
TECH PUBLIC Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownTPRT9013-25GB
TECH PUBLIC · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPRT9013-25GB from TECH PUBLIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply power input. Absolute maximum 7V; typical operation Vout+1V ≤ VIN ≤ 8V. Bypass with 1uF ceramic to GND. |
| 2 | GND | power_in | Device ground reference for both the input supply and the regulated output. |
| 3 | CE | input | Chip Enable / shutdown control input. Drive high (VCE ≥ 1.1V max threshold) to enable the regulator; drive low (Vce = 0V) to place the device into shutdown (<1uA standby current). |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to GND. |
| 5 | VOUT | power_out | Regulated voltage output. Fixed 2.5V (±2%) for the -25 option code, up to 500mA (typ). Requires a 1uF ceramic output capacitor to GND for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TECH PUBLIC |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
TPRT9013-25GB
CAD (KiCad official)
- Symbol:
TPRT9013-25GB - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
tprt9013-25gb.step |
85 KB | You want the bare part, or you mark your own boards. |
tprt9013-25gb-etched.step |
2.4 MB | You want the part with TPRT9013-25GB already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 593 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TECH PUBLIC datasheet (5 pp, sha256
05d94b078ebd02b6, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).