TPMCP6001T-I from TECH PUBLIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT	output	Op-amp output. Rail-to-rail output swing; typical VOL-VSS and VDD-VOH within 6mV with RL=100kΩ. Short-circuit current ±20mA (typ).
2	VSS	power_in	Negative supply / ground reference. VDD-VSS supply range 1.8V to 5.5V; absolute max 7V.
3	IN+	input	Non-inverting analog input. Input common-mode range -0.1V to VDD+0.1V (rail-to-rail input). Input bias current 10pA typ.
4	IN-	input	Inverting analog input. Input common-mode range -0.1V to VDD+0.1V. Input offset voltage 0.5mV typ, ±5mV max.
5	VDD	power_in	Positive supply. Operating range 1.8V to 5.5V; absolute max VDD-VSS = 7V. Quiescent current 55µA typ per amplifier.

Key specifications

Parameter	Value
Manufacturer	TECH PUBLIC
Package	SOT-23-5
Category	Op-amp/Cmp
Pins	5

Ordering variants

Same part, different packaging or reel option.

TPMCP6001T-I/OT

CAD (KiCad official)

Symbol: TPMCP6001T-I
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`tpmcp6001t-i.step`	85 KB	You want the bare part, or you mark your own boards.
`tpmcp6001t-i-etched.step`	1.9 MB	You want the part with `TPMCP6001T-I` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 487 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: TECH PUBLIC datasheet (6 pp, sha256 aaa8fec0691a37c2, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF