component

TPH2504-TR

Public Unreviewed

by Ray

3PEAK Operational Amplifier, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentop-amp-cmptph2504-tr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

TPH2504-TR

3PEAK · Operational Amplifier · TSSOP-14

TPH2504-TR from 3PEAK, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out A output Amplifier A output. Rail-to-rail output stage; short-circuit current typically 160mA sink / 290mA source.
2 -In A input Amplifier A inverting input. Rail-to-rail input; V- - 0.1V to V+ - 0.1V common-mode range.
3 +In A input Amplifier A non-inverting input. Rail-to-rail CMOS input, 0.3pA typical bias current.
4 +Vs power_in Positive supply. 2.5V to 5.5V single-supply or symmetric split-supply operation; 6.5mA/amp typical quiescent current.
5 +In B input Amplifier B non-inverting input. Rail-to-rail CMOS input, 0.3pA typical bias current.
6 -In B input Amplifier B inverting input. Rail-to-rail input with ESD-protection clamp diodes to each supply (limit input current to <10mA if driving >500mV beyond a rail).
7 Out B output Amplifier B output. Rail-to-rail; typical output swing within 2mV of the rails at RL=100kΩ.
8 Out C output Amplifier C output. Rail-to-rail output stage; 100mA min short-circuit current.
9 -In C input Amplifier C inverting input.
10 +In C input Amplifier C non-inverting input.
11 -Vs power_in Negative supply / ground. Tie to GND for single-supply operation, or to a negative rail for split-supply. Total supply span (V+ - V-) must not exceed 7.0V.
12 +In D input Amplifier D non-inverting input.
13 -In D input Amplifier D inverting input.
14 Out D output Amplifier D output. Rail-to-rail; ±160mA absolute maximum output current.

Key specifications

Parameter Value
Manufacturer 3PEAK
Package TSSOP-14
Category Op-amp/Cmp
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • TPH2504-TR
  • TPH2504-SR

CAD (KiCad official)

  • Symbol: TPH2504-TR
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: 3PEAK datasheet (18 pp, sha256 774114f825b87a64, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF