TLV9062IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT1	output	Amplifier output, channel 1. Rail-to-rail output stage; capable of driving up to 100 pF capacitive load with resistive open-loop output impedance for easier stability.
2	IN1-	input	Inverting input, channel 1. Rail-to-rail input; typical input bias current 0.5 pA.
3	IN1+	input	Noninverting input, channel 1. Rail-to-rail input; typical input bias current 0.5 pA.
4	V-	power_in	Negative (lowest) supply rail, or GND for single-supply operation. Total supply (V+) - (V-) is 1.8 V to 5.5 V.
5	IN2+	input	Noninverting input, channel 2. Rail-to-rail input; typical input bias current 0.5 pA.
6	IN2-	input	Inverting input, channel 2. Rail-to-rail input; typical input bias current 0.5 pA.
7	OUT2	output	Amplifier output, channel 2. Rail-to-rail output stage; capable of driving up to 100 pF capacitive load with resistive open-loop output impedance for easier stability.
8	V+	power_in	Positive (highest) supply rail. Total supply (V+) - (V-) is 1.8 V to 5.5 V.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	VSSOP-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

TLV9062IDGKR
TLV9062IDGKT
TLV9062IDGKRD
TLV9062IDGKRPW
TLV9062IDGKRDDF
TLV9062IDGKRDSG

CAD (KiCad official)

Symbol: TLV9062IDGKR
Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
3D model: VSSOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`tlv9062idgkr.step`	122 KB	You want the bare part, or you mark your own boards.
`tlv9062idgkr-etched.step`	2.3 MB	You want the part with `TLV9062IDGKR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 573 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (75 pp, sha256 424562d65438d8ae, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF