TLV6003DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT	output	Amplifier output. Rail-to-rail output; can sink/source up to ±10 mA (absolute max) with typical output current of ±200 µA to within 0.5 V of the rail.
2	GND	power_in	Negative (lowest) power supply. Ground reference for single-supply operation, or negative rail (down to -8 V) for split-supply operation.
3	+IN	input	Noninverting input. High-impedance input (300 MΩ differential, 3 pF common-mode); input common-mode range extends from -0.1 V to VCC+5 V.
4	-IN	input	Inverting input. High-impedance input (300 MΩ differential); input bias current typically 100 pA (250 pA max at 25°C).
5	VCC	power_in	Positive (highest) power supply. Supply voltage range 2.5 V to 16 V (single supply) or ±1.25 V to ±8 V (split supply). Absolute maximum 17 V; includes reverse battery protection up to -18 V.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOT-23-5
Category	Op-amp/Cmp
Pins	5

Ordering variants

Same part, different packaging or reel option.

TLV6003DBVR
TLV6003DBVRDBVT

CAD (KiCad official)

Symbol: TLV6003DBVR
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`tlv6003dbvr.step`	85 KB	You want the bare part, or you mark your own boards.
`tlv6003dbvr-etched.step`	2.0 MB	You want the part with `TLV6003DBVR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 502 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (26 pp, sha256 067f6223bc5075a1, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF