component

TL082 Dual JFET Op-Amp

Public Unreviewed

by Ray

Dual JFET-input operational amplifier with high slew rate and low input bias current.

op-ampjfetdualanalogamplifiertisoic-8
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

TL082

Texas Instruments · Operational Amplifier · SOIC-8

The TL082 packs two JFET-input operational amplifiers into a single 8-pin body. The JFET inputs give high input impedance and low bias current, while the 13 V/us slew rate and 3 MHz bandwidth suit active filters, integrators, and audio signal conditioning.

Pinout

Pin Name Type Function
1 1OUT output Output of amplifier 1. Class-AB output stage with continuous short-circuit protection; drives loads referenced between VCC- and VCC+.
2 1IN- input Inverting input of amplifier 1. High-impedance JFET gate input. Input pins are diode-clamped to the power-supply rails; overdrive current must be limited to <=10 mA.
3 1IN+ input Non-inverting input of amplifier 1. High-impedance JFET gate input. Common-mode input range extends to VCC+ (see Recommended Operating Conditions).
4 VCC- power_in Negative supply rail (or ground for single-supply operation). Total supply span (VCC+) - (VCC-) must be between 10 V and 30 V for NS/PS/TL08xM packages, or 4.5 V to 40 V for other devices. Absolute-max supply voltage is 36 V (NS/PS/TL08xM) or 42 V.
5 2IN+ input Non-inverting input of amplifier 2. High-impedance JFET gate input. Common-mode input range extends to VCC+.
6 2IN- input Inverting input of amplifier 2. High-impedance JFET gate input. Input pins are diode-clamped to the power-supply rails; overdrive current must be limited to <=10 mA.
7 2OUT output Output of amplifier 2. Class-AB output stage with continuous short-circuit protection; drives loads referenced between VCC- and VCC+.
8 VCC+ power_in Positive supply rail. Total supply span (VCC+) - (VCC-) must be between 10 V and 30 V (NS/PS/TL08xM) or 4.5 V to 40 V (other devices). Bypass to VCC- with a local decoupling capacitor.

Key specifications

Parameter Value
Type Dual JFET-input op-amp
Supply voltage +-2.25 V to +-18 V (4.5 V to 36 V single)
Input bias current 30 pA typ
Slew rate 13 V/us typ
Gain-bandwidth product 3 MHz typ
Input offset voltage 3 mV typ
Operating temperature 0 C to 70 C

Ordering variants

Same part, different packaging or reel option.

  • TL082D
  • TL082P
  • TL082PS
  • TL082PW
  • TL082DGK
  • TL082DDF
  • TL082JG
  • TL082FK

CAD (KiCad official)

  • Symbol: tl082.kicad_sym
  • Footprint: tl082.kicad_mod
  • 3D model: SOIC-8 body from KiCad Package_SO/SOIC-8_3.9x4.9mm_P1.27mm.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (78 pp, sha256 6a831542dbeee1d7, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF