TL062IDR
Public Unreviewedby Ray
Texas Instruments FET InputAmplifiers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownTL062IDR
Texas Instruments · FET InputAmplifiers · SOIC-8
TL062IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1. |
| 2 | 1IN- | input | Inverting (negative) input of amplifier 1. High-impedance JFET input. |
| 3 | 1IN+ | input | Non-inverting (positive) input of amplifier 1. High-impedance JFET input. |
| 4 | VCC- | power_in | Negative supply rail. Typical dual-supply operation ±15 V; single-supply operation also supported. |
| 5 | 2IN+ | input | Non-inverting (positive) input of amplifier 2. High-impedance JFET input. |
| 6 | 2IN- | input | Inverting (negative) input of amplifier 2. High-impedance JFET input. |
| 7 | 2OUT | output | Output of amplifier 2. |
| 8 | VCC+ | power_in | Positive supply rail. Typical dual-supply operation ±15 V; single-supply operation also supported. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
TL062IDRDTL062IDRTL062IDRCDTL062IDRIDTTL062IDRPTL062IDRPSTL062IDRJGTL062IDRPWTL062IDRFK
CAD (KiCad official)
- Symbol:
TL062IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
tl062idr.step |
122 KB | You want the bare part, or you mark your own boards. |
tl062idr-etched.step |
1.7 MB | You want the part with TL062IDR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 428 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (58 pp, sha256
8b4d9405b319a9d3, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).