Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

TL062

Texas Instruments · Operational Amplifier · SOIC-8

The TL062 is a dual low-power JFET-input operational amplifier. It combines high input impedance and low bias current of JFET inputs with low supply current, suiting battery-powered active filters, sensor buffering, and general signal conditioning where power budget matters. It is the low-power member of the TL06x/07x/08x family.

Pinout

Pin Name Type Function
1 1OUT output Amplifier 1 output. Short-circuit protected; can source/sink current to drive typical op-amp loads. Slew rate 3.5 V/µs typical.
2 1IN- input Amplifier 1 inverting (negative) input. JFET input stage - high input impedance and low input bias current.
3 1IN+ input Amplifier 1 non-inverting (positive) input. JFET input stage; common-mode range includes VCC+. Input voltage magnitude must not exceed the supply magnitude or 15 V, whichever is less.
4 VCC- power_in Negative supply rail. Recommended -5 V to -15 V (absolute max -18 V). Shared by both amplifiers.
5 2IN+ input Amplifier 2 non-inverting (positive) input. JFET input stage; common-mode range includes VCC+.
6 2IN- input Amplifier 2 inverting (negative) input. JFET input stage - high input impedance and low input bias current.
7 2OUT output Amplifier 2 output. Short-circuit protected; can source/sink current to drive typical op-amp loads.
8 VCC+ power_in Positive supply rail. Recommended 5 V to 15 V (absolute max 18 V). Shared by both amplifiers.

Key specifications

Parameter Value
Type Dual low-power JFET-input op-amp
Supply voltage +-3 V to +-18 V
Supply current 200 uA/amp typ
Input bias current 30 pA typ
Slew rate 3.5 V/us typ
Gain-bandwidth product 1 MHz typ
Operating temperature 0 C to 70 C

Ordering variants

Same part, different packaging or reel option.

  • TL062D
  • TL062P
  • TL062PS
  • TL062JG
  • TL062PW
  • TL062FK

CAD (KiCad official)

  • Symbol: tl062.kicad_sym
  • Footprint: tl062.kicad_mod
  • 3D model: SOIC-8 body from KiCad Package_SO/SOIC-8_3.9x4.9mm_P1.27mm.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (58 pp, sha256 8b4d9405b319a9d3, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF