Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

TF0211C-USQ

TFSS · Gate Drivers · SOT-23-5L

TF0211C-USQ from TFSS, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Positive supply input. Recommended operating range 4.5V to 18V; absolute maximum 22V. Bypass locally with a low-ESR ceramic capacitor to GND.
2 GND power_in Supply return / device ground reference for VCC and all logic-level signals.
3 IN input Non-inverting logic input. TTL/CMOS compatible down to 3.3V (VIH >= 2.4V, VIL <= 0.8V). Together with IN* determines OUT state per the input/output response table (OUT = IN AND NOT(IN*)).
4 IN* input Inverting logic input (active-low enable-like function). TTL/CMOS compatible down to 3.3V. When IN*=1 the output is forced low regardless of IN; when IN*=0 the output follows IN.
5 OUT output Gate driver output. Push-pull output capable of 1.9A source / 1.8A sink peak pulsed current, driving MOSFET or IGBT gates. Swings from GND to VCC; typical VOH within 25mV of VCC, VOL within 25mV of GND.

Key specifications

Parameter Value
Manufacturer TFSS
Package SOT-23-5L
Category Motor Driver ICs
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • TF0211C-USQ
  • TF0211E

CAD (KiCad official)

  • Symbol: TF0211C-USQ
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TFSS datasheet (6 pp, sha256 41d9b022dacd64f7, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF