SSP61CN3602MR
Public Unreviewedby Ray
Shanghai Siproin Microelectronics Supervisor and Reset ICs, SOT-23. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownSSP61CN3602MR
Shanghai Siproin Microelectronics · Supervisor and Reset ICs · SOT-23
SSP61CN3602MR from Shanghai Siproin Microelectronics, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Voltage detector output. N-channel open-drain: pulled low (to VSS) when VIN ≤ VDET(−) ≈ 3.6 V, and Hi-Z when VIN > VDET(+). Requires an external pull-up resistor (typ. 100 kΩ) to VDD or a separate supply. Guaranteed sink current IOL ≥ 0.5 mA (typ. 1 mA) at VOUT=0.2 V with VIN=2 V. |
| 2 | GND | power_in | Ground / VSS reference for the device. Connect to system ground. |
| 3 | VIN | power_in | Supply voltage input and monitored voltage. Absolute maximum −0.3 V to +8.0 V; operating range 0.7 V to 10 V (typ. per datasheet). This is the voltage compared against the internal 3.6 V reference to drive VOUT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
SSP61CN3602MRMSSP61CN3602MRN
CAD (KiCad official)
- Symbol:
SSP61CN3602MR - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
ssp61cn3602mr.step |
59 KB | You want the bare part, or you mark your own boards. |
ssp61cn3602mr-etched.step |
2.6 MB | You want the part with SSP61CN3602MR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 618 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Siproin Microelectronics datasheet (10 pp, sha256
49887c43b8edefc9, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).