SSP1117-3.3V
Public Made by Adomby adom
Shanghai Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-3. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗README
markdownSSP1117-3.3V
Siproin's datasheet does not state the tab connection; this land follows the 1117-family convention (tab = Vout). Check before use.
Shanghai · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-3
SSP1117-3.3V from Shanghai, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | input | Ground return for the regulator. On the fixed-output SSP1117-3.3V this pin is the device ground reference; on the ADJ variant the same pin becomes the ADJ feedback node. |
| 2 | VOUT | power_out | Regulated 3.3V output. Sources up to 1A load current. Requires a 10uF tantalum output capacitor for stability. |
| 3 | VIN | power_in | Unregulated input supply. Recommended maximum 20V, absolute max 30V. For the 3.3V output, minimum operating Vin is 4.8V with a 10uF tantalum bypass capacitor recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai |
| Package | SOT-223-3 |
| Category | PMIC |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (SSP1117-3.3V) | Vout | 3.234 | 3.3 | 3.366 | V | 0≤Iout≤1A, Vin=5.3V | 4 |
| Line regulation (SSP1117-3.3V) | △Vout | 0.03 | 0.2 | %/V | Iout=10mA, 4.8V≤Vin≤12V | 4 | |
| Load regulation (SSP1117-3.3V) | △Vout | 6 | 24 | mV | Vin=4.8V, 10mA≤Iout≤1A | 5 | |
| Dropout voltage at 100mA | Vdrop | 1.15 | 1.3 | V | Iout=100mA | 5 | |
| Dropout voltage at 1A | Vdrop | 1.3 | 1.5 | V | Iout=1A | 5 | |
| Quiescent current (SSP1117-3.3V) | Iq | 2 | 5 | mA | Vin=12V | 5 | |
| Temperature coefficient | ΔV/ΔT | -100 | 100 | ppm | 5 | ||
| Thermal resistance junction-to-case, SOT-223 | θJC | 20 | ℃/W | 5 | |||
| Package thermal resistance, SOT-223 | 20 | ℃/W | 3 | ||||
| Max input voltage | 30 | V | 3 | ||||
| Max operating junction temperature | Tj | 150 | ℃ | 3 | |||
| Ambient temperature | Ta | -40 | 85 | ℃ | 3 | ||
| Storage temperature | Ts | -40 | 150 | ℃ | 3 | ||
| Lead temperature | 260 | ℃ | 10S | 3 | |||
| Recommended maximum input voltage | 20 | V | 3 | ||||
| Recommended operating junction temperature | Tj | -20 | 125 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
SSP1117-3.3V - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files:
ssp1117-3-3v-etched.step/ssp1117-3-3v-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ssp1117-3-3v.step/ssp1117-3-3v.glbare the bare package body.
Provenance
No distributor stocks SSP1117-3.3V yet. This page was built from the datasheet.
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai datasheet (9 pp, sha256
4548d0eb79d83846, retrieved 2026-11-13, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).