component

SP3485EEN

Public Unreviewed

by Ray

UMW RS-485 / RS-422 ICs, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentinterfacesp3485een
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

SP3485EEN

UMW · RS-485 / RS-422 ICs · SOP-8

SP3485EEN from UMW, in a SOP-8. Pinout and pin descriptions extracted from the datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output. When /RE is low: RO = high if (A-B) >= 200 mV, RO = low if (A-B) <= -200 mV. High-impedance when receiver is disabled.
2 /RE input Active-low receiver output enable. When /RE = low, receiver is enabled and RO is driven. When /RE = high, receiver output is high-impedance. If /RE = high AND DE = low, the device enters low-power shutdown mode.
3 DE input Driver output enable. When DE = high, driver outputs (A, B) are enabled. When DE = low, driver outputs are high-impedance. If /RE = high AND DE = low, the device enters low-power shutdown mode.
4 DI input Driver data input. When DE = high: DI low forces non-inverting driver output A low and inverting output B high; DI high forces A high and B low.
5 GND power_in Ground reference for the device. All voltages are referenced to this pin.
6 A bidirectional Non-inverting RS-485 bus pin: non-inverting receiver input and non-inverting driver output. Bus-side voltage tolerance -7 V to +13 V; receiver input resistance >= 96 kΩ (1/8 unit load).
7 B bidirectional Inverting RS-485 bus pin: inverting receiver input and inverting driver output. Bus-side voltage tolerance -7 V to +13 V; receiver input resistance >= 96 kΩ (1/8 unit load).
8 VCC power_in Supply voltage input, 3.0 V to 3.6 V (nominal 3.3 V). Absolute maximum 7 V. Typical supply current 520-540 µA. Bypass locally with a 0.1 µF capacitor to GND.

Key specifications

Parameter Value
Manufacturer UMW
Package SOP-8
Category Interface
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • SP3485EEN

CAD (KiCad official)

  • Symbol: SP3485EEN
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
sp3485een.step 122 KB You want the bare part, or you mark your own boards.
sp3485een-etched.step 2.1 MB You want the part with SP3485EEN already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 512 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (18 pp, sha256 06fdac69a6ccf46e, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF