SCT2332TVBR from SCT, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	FB	input	Buck converter output feedback sensing voltage. Connect a resistor divider from VOUT to FB to set the output voltage. The device regulates FB to the internal 0.8V (typical) reference.
2	EN	input	Enable logic input. Floating the pin enables the device. Supports high-voltage input up to VIN, so it may be tied directly to VIN for auto-enable. Precision enable thresholds (1.18V rising / 1.1V falling) allow programmable UVLO threshold and hysteresis via a resistor divider.
3	VIN	power_in	Power supply input, 3.8V to 32V operating range (absolute max 34V). Must be locally bypassed with a ceramic capacitor close to the pin.
4	GND	power_in	Power ground. Must be soldered directly to the ground plane for proper thermal dissipation and low-impedance return path.
5	SW	output	Switching node of the buck converter. Connect to the external inductor. Absolute max -0.3V to 34V.
6	BST	power_in	Bootstrap supply for the high-side power MOSFET gate driver. Connect a 0.1uF or greater ceramic capacitor between BST and SW. Absolute max -0.3V to 40V.

Key specifications

Parameter	Value
Manufacturer	SCT
Package	TSOT-23-6L
Category	PMIC
Pins	6

Ordering variants

Same part, different packaging or reel option.

SCT2332TVBR

CAD (KiCad official)

Symbol: SCT2332TVBR
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: TSOT-23-6L (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`sct2332tvbr.step`	97 KB	You want the bare part, or you mark your own boards.
`sct2332tvbr-etched.step`	2.3 MB	You want the part with `SCT2332TVBR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 547 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: SCT datasheet (20 pp, sha256 2450a3567deac868, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF