PIC12F1572-I from Microchip, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VDD	power_in	Positive supply voltage. Operating range 2.3V to 5.5V (PIC12F1572) or 1.8V to 3.6V (PIC12LF1572). Bypass with 0.1 uF ceramic close to the pin.
2	RA5	bidirectional	General purpose I/O with individually selectable weak pull-up and interrupt-on-change. Alternate functions: T1CKI (Timer1 clock input), PWM1 output (alt), EUSART RX/DT (alt), CWG1A output (alt), CLKIN (external oscillator input).
3	RA4	bidirectional	General purpose I/O with weak pull-up and IOC. Alternate functions: AN3 (ADC ch3), C1IN1- (comparator input), T1G (Timer1 gate), PWM2 (alt), EUSART TX/CK (alt), CWG1B (alt), CLKOUT.
4	RA3/MCLR/VPP	input	Input-only pin. Master Clear (active-low reset) when MCLRE is enabled, or general-purpose input RA3 with weak pull-up and IOC when MCLR is disabled. Also serves as programming high-voltage entry pin (VPP) during ICSP. Optional T1G alternate.
5	RA2	bidirectional	General purpose I/O with weak pull-up, interrupt-on-change, and external interrupt (INT). Alternate functions: AN2 (ADC ch2), C1OUT (comparator output), T0CKI (Timer0 clock), PWM3, CWG1FLT (fault input), CWG1A (default).
6	RA1/ICSPCLK	bidirectional	General purpose I/O with weak pull-up and IOC. Alternate functions: AN1 (ADC ch1), VREF+ (external ADC/DAC reference input), C1IN0- (comparator input), PWM1 (default), EUSART RX/DT (default), ICSPCLK/ICDCLK (in-circuit serial programming clock).
7	RA0/ICSPDAT	bidirectional	General purpose I/O with weak pull-up and IOC. Alternate functions: AN0 (ADC ch0), DAC1OUT (5-bit DAC output), C1IN+ (comparator +input), PWM2 (default), EUSART TX/CK (default), CWG1B (default), ICSPDAT/ICDDAT (ICSP data).
8	VSS	power_in	Ground/negative supply reference (0 V). Common return for VDD.

Key specifications

Parameter	Value
Manufacturer	Microchip
Package	SOIC-8
Category	MCU
Pins	8

Ordering variants

Same part, different packaging or reel option.

PIC12F1572-II/P
PIC12F1572-IE/P
PIC12F1572-II/SN
PIC12F1572-IE/SN
PIC12F1572-II/MS
PIC12F1572-IE/MS
PIC12F1572-II/MF
PIC12F1572-IE/MF
PIC12F1572-II/RF
PIC12F1572-IE/RF

CAD (KiCad official)

Symbol: PIC12F1572-I
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`pic12f1572-i.step`	122 KB	You want the bare part, or you mark your own boards.
`pic12f1572-i-etched.step`	1.9 MB	You want the part with `PIC12F1572-I` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 498 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Microchip datasheet (334 pp, sha256 c28be7d052c3bf4f, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF