PAM8302AADCR from Diodes Incorporated, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	SD	input	Active-low shutdown. Drive low (VSL ≤ 0.4V) to place the amplifier in low-power shutdown (ISHDN ≤ 1µA); drive high (VSH ≥ 1.2V) for normal operation. Recommended to be delayed 1-100ms (typ 10ms) after VDD rises for pop-free start-up.
2	NC	unconnected	No internal connection. Leave floating or tie to GND for best PCB practice.
3	IN+	input	Non-inverting analog audio input. AC-couple through a 0.1-0.22µF capacitor (typ 0.1µF) that forms a high-pass filter with the 10kΩ internal input impedance. Internally biased to VDD/2.
4	IN-	input	Inverting analog audio input. AC-couple through a 0.1-0.22µF capacitor (typ 0.1µF); for single-ended sources this pin is capacitor-coupled to signal ground. Internal 10kΩ input resistor sets the gain with the 150kΩ feedback resistor (fixed 23.5dB max).
5	VO+	output	Positive Class-D BTL PWM speaker output. Connects directly to one speaker terminal (filterless); optional ferrite bead + 220pF to GND for EMI reduction. Delivers up to 2.5W into 4Ω at VDD=5V.
6	VDD	power_in	Positive supply, 2.0V to 5.5V (absolute max 6.0V). Decouple with a 1µF ceramic close to the pin plus 10µF bulk. Quiescent current typ 4mA, max 8mA at no-load.
7	GND	power_in	Device ground. All voltages are referenced to this pin; connect to a solid ground plane for best thermal and EMI performance.
8	VO-	output	Negative Class-D BTL PWM speaker output. Connects directly to the other speaker terminal (filterless); optional ferrite bead + 220pF to GND for EMI reduction.

Key specifications

Parameter	Value
Manufacturer	Diodes Incorporated
Package	SOP-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

PAM8302AADCR
PAM8302AADCRAASCR
PAM8302AADCRAAYCR

CAD (KiCad official)

Symbol: PAM8302AADCR
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`pam8302aadcr.step`	122 KB	You want the bare part, or you mark your own boards.
`pam8302aadcr-etched.step`	2.5 MB	You want the part with `PAM8302AADCR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 625 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Diodes Incorporated datasheet (14 pp, sha256 fb2ab762c31b5fd4, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF